Anyone have the Infamous Heater Core Instructions?
Thread Starter
|
Junior Member
Joined: Mar 2006
Posts: 3
Likes: 0
Anyone have the Infamous Heater Core Instructions?
I'm contemplating replacing the Heater Core on my 98 F-150. Could
someone PLEASE send me the Instructions taht everyone requesting?
Thanks Much! tburns@group1advertising.com
someone PLEASE send me the Instructions taht everyone requesting?
Thanks Much! tburns@group1advertising.com
Senior Member
Joined: Feb 2006
Posts: 3,762
Likes: 0
From: Windsor, Ont.
Other than getting those big service manuals, which isn't a bad idea for more reasons, go on Ebay and get a CD for the computer, under $10 for it and I believe it's as good, that should have a diagram.
Member
Joined: Sep 2002
Posts: 95
Likes: 0
Sorry to hijack your post, I could use those instructions as well...much appreciated!
abbeymtg@comcast.net
AMMOEATER
abbeymtg@comcast.net
AMMOEATER
Senior Member
Joined: Dec 2005
Posts: 104
Likes: 0
From: Missouri
I have install AC on those trucks since 1997.
Its about a 3 hour job to R&R everything drop in the AC coil and button the inside of the cab parts back in place.
The heater core is RIGHT there when you are dropping in the AC coil. So all the labor is the same.
Drop the steering column
remove all the dash bezel trim headlight switch air bag, lower braces. hidden bolt under the instrument cluster. the a pillar trim kick panels door sill plates.
once you have the dash loose and the pass side sitting in the seat loosen the HVAC case bolts under the hood to the last thread or so and slide the case back 1" or so.
remove the 12-15 8mm heads screws from the HVAC top case. there is the heater core.
I probably skipped some things, I've done so many.
Its about a 3 hour job to R&R everything drop in the AC coil and button the inside of the cab parts back in place.
The heater core is RIGHT there when you are dropping in the AC coil. So all the labor is the same.
Drop the steering column
remove all the dash bezel trim headlight switch air bag, lower braces. hidden bolt under the instrument cluster. the a pillar trim kick panels door sill plates.
once you have the dash loose and the pass side sitting in the seat loosen the HVAC case bolts under the hood to the last thread or so and slide the case back 1" or so.
remove the 12-15 8mm heads screws from the HVAC top case. there is the heater core.
I probably skipped some things, I've done so many.
Technical Article Contributor
Joined: May 2004
Posts: 6,509
Likes: 6
From: Georgia on my mind...
