Pie wiring for power in Factory Radio HU

Thread Tools
 
Search this Thread
 
Old May 31, 2007 | 11:23 AM
  #1  
GeronC's Avatar
Thread Starter
|
Member
Joined: May 2007
Posts: 24
Likes: 0
From: Memphis
Pie wiring for power in Factory Radio HU

Can someone please tell me the wiring colors to pull power off of the HU to hook up a PIE? I have an 05 150 XLT. I would like for the PIE to come on and off with the radio or else i would just tap into the cigarette lighter power. If i happen to look over the tread, will you send me that link then please? Thanks.
 
Reply
Old Jun 1, 2007 | 09:09 AM
  #2  
lenore's Avatar
Senior Member
Joined: Apr 2006
Posts: 521
Likes: 7
From: Sacramento, CA
pin 1 on the 24 pin jack on the head unit is 12v power, and pin 13 is ground, however you could use any chassis ground point on the dash.... You could tap off the wire on pin 1 and get your 12volts... Sorry I dont have the wire color, pin 1 is on the very end of the connector....If you have a voltmeter you will find it.
 
Reply
Old Jun 1, 2007 | 09:29 AM
  #3  
GeronC's Avatar
Thread Starter
|
Member
Joined: May 2007
Posts: 24
Likes: 0
From: Memphis
Thanks for the info. Do you know who has the diagram of the connector? I tried finding it again and can't. Thanks.
 
Reply
Old Jun 1, 2007 | 10:57 AM
  #4  
lenore's Avatar
Senior Member
Joined: Apr 2006
Posts: 521
Likes: 7
From: Sacramento, CA
discountcarstereo.com then search
 
Reply




All times are GMT -4. The time now is 06:33 AM.