Lower Grille
Registered User
Joined: Aug 2002
Posts: 146
Likes: 0
From: TX
Woohoo!
Package waiting for me on the front porch...
My lower grille from J&J is HERE!!
Can't wait to put it on. Gonna head out there now and figure out how to get the stock one out, dremel it, and put it all back in all purty!
Hope to get some pics online soon.
Package waiting for me on the front porch...
My lower grille from J&J is HERE!!
Can't wait to put it on. Gonna head out there now and figure out how to get the stock one out, dremel it, and put it all back in all purty!
Hope to get some pics online soon.
Senior Member
Joined: Sep 2001
Posts: 7,861
Likes: 0
From: Week-Philly, Weekend-Dirty Souf Jerz
good luck with the install. can't wait to see the pics. its gonna be a 200% improvement over the lame black grille. who knows why after 00 they stopped chroming the lower grille 
I'll be ordering a set of matching inserts for my cervini's hood soon from them, so all 3 of my grilles match. Kinda pricey though. 65 bucks for the set (only 3 bars tall too, and about 6" long
) and 15 bucks shipping! Almost costs as much as your guy's WAAAY bigger lower grille insert
I should have bought them back when blwnhd#34 told me he got his for 27 bucks!
nothin else i can do though so....
I'll be ordering a set of matching inserts for my cervini's hood soon from them, so all 3 of my grilles match. Kinda pricey though. 65 bucks for the set (only 3 bars tall too, and about 6" long
) and 15 bucks shipping! Almost costs as much as your guy's WAAAY bigger lower grille insert I should have bought them back when blwnhd#34 told me he got his for 27 bucks!
nothin else i can do though so....
Registered User
Joined: Aug 2002
Posts: 146
Likes: 0
From: TX
*Grrrr* Kinda growling at it for the moment. Came in to settle. *L*
Got the three bottom plastic supports off, but am having no success in getting the four plastic tabs out of the slots that hold the grille in place at the top.
If any of you other guys have some helpful hints from Heloise, I'll take it while I sit here and contemplate my navel.
HG
Got the three bottom plastic supports off, but am having no success in getting the four plastic tabs out of the slots that hold the grille in place at the top.
If any of you other guys have some helpful hints from Heloise, I'll take it while I sit here and contemplate my navel.
HG
Senior Member
Joined: Sep 2001
Posts: 7,861
Likes: 0
From: Week-Philly, Weekend-Dirty Souf Jerz
i was gonna ask if you posted on the other site where flyarmy did cuz that's where he posted pics of his, but i see you already did. 
good luck with everything, it'll be worth it in the end
good luck with everything, it'll be worth it in the end
Member
Joined: Jul 2002
Posts: 72
Likes: 0
From: FT. Rucker, AL
Hawg,
The two on the outside, just pull out the small metal clips.
For the two on the inside, I wedged a small screwdriver from the side to lift the plastic on the top until the insert could slide out.
The two on the outside, just pull out the small metal clips.
For the two on the inside, I wedged a small screwdriver from the side to lift the plastic on the top until the insert could slide out.
Member
Joined: Jul 2002
Posts: 50
Likes: 0
From: Valencia, Ca
Hate to bring a post back from the dead, but how long did it take you guys to get the lower grille, Our truck is going in to the body shop tomorrow and I was going to have them order it so they can put it on when they get then new front bumper.
