Keyless Keypad Installed
I just installed the keyless keypad in my HD truck tonight. It only took an hour and the directions on How-To were perfect.
The part numbers from Ford are:
YL3Z14A626AA Keypad $ 57.50
XL1Z7822405BAH Door Handle $ 41.00
------------------
HD F150
2000 FLHTCUI
1970 OLDS Cutlass W 31
2000 Lincoln LS
The part numbers from Ford are:
YL3Z14A626AA Keypad $ 57.50
XL1Z7822405BAH Door Handle $ 41.00
------------------
HD F150
2000 FLHTCUI
1970 OLDS Cutlass W 31
2000 Lincoln LS
I got the how to from th elightning board thread, and the parts from my local dealer, you can also get the parts from fordpartsonline.com for around the same prices.
------------------
HD F150
2000 FLHTCUI
1970 OLDS Cutlass W 31
2000 Lincoln LS
------------------
HD F150
2000 FLHTCUI
1970 OLDS Cutlass W 31
2000 Lincoln LS
I didn't have any problems at all. As long as you order the keypad for F150 you shouldn't have a problem either.
------------------
HD F150
2000 FLHTCUI
1970 OLDS Cutlass W 31
2000 Lincoln LS
------------------
HD F150
2000 FLHTCUI
1970 OLDS Cutlass W 31
2000 Lincoln LS
Removing the door panel is very easy : ) First remove the "sail panel" the cover on the left upper part of door around window, pops right off, underneath is a screw, remove screw, next pop off cover behind door handle, there is a screw, remove screw. Once that is done, just lift the door panel straight up and it is off. Of course, unplug all electrical items, very simple...
------------------
HD F150
2000 FLHTCUI
1970 OLDS Cutlass W 31
2000 Lincoln LS
------------------
HD F150
2000 FLHTCUI
1970 OLDS Cutlass W 31
2000 Lincoln LS
Trending Topics
Motorworf,
My dealer gave me several screws, he wasn't sure which one I needed but the right one was in the bunch. You just have to make sure it isn't too long, no longer then 3/8 of an inch. It was a trim screw I believe, I have more I can send to you. Email me and I will mail it to you.
harley8784@aol.com
------------------
HD F150
2000 FLHTCUI
1970 OLDS Cutlass W 31
2000 Lincoln LS
My dealer gave me several screws, he wasn't sure which one I needed but the right one was in the bunch. You just have to make sure it isn't too long, no longer then 3/8 of an inch. It was a trim screw I believe, I have more I can send to you. Email me and I will mail it to you.
harley8784@aol.com
------------------
HD F150
2000 FLHTCUI
1970 OLDS Cutlass W 31
2000 Lincoln LS


