the way ford set up the driving lights always buged me. i wanted to use the auto headlights but i also wanted to use the fog lights. so i was looking at the hot to section on this sight and saw a mod. (designed for a lightining but will work on the HD f150). anyways they way they said to do it was very difficult and requited modifying the switch. i didnt want to do this so i spliced the driving light wire into the headlight wire. now when ever the auto lamps are on so are the driving lights. if you want info on how i did this got to the how to section or e-mail me. it is really neat. plus now the driving lights stay on for 20 sec with the regular low beams. if you splice them diffrently you can also make the driving lights stay on whenever the awitch is in the auto lamp mode. i didnt have to cut anything either because i got a wire splicer from home depot. it cuts the insulation and contacts the wire without cutting.

-steve

ps it cost me 55cents

 

The reason Ford didn't want to have the fog light's on by them self's is cause people will only have the fog's on instead of the normal light's, witch can have alot of problems with police and what not.

------------------
01,Black,Lightning
K@N air filter
Super flip Chip

 

i made it so the driving lights are always on with the headlights. i think that is how they should be. i agree they should not be on by themselves

-steve

 

Yes,

But is there a way for us "Outlaws" to perform such a procedure as to only run the foglights?

Mike

------------------
Stay Out Of My Taildust

2000 Black Harley Davidson F-150
5.4 Liter v-8
K&N Air filter
20" Polished Aluminum Wheels
275/45/20 Goodyear GSII's
Billet Front Grille
Front Valence W/ driving lights and Billet Insert
3.55 Rear End
Leather Interior
Heated Seats
Hidden Hitch
Orange Pinstriping
Front and Rear Light Blackouts
Lowered 1" Front & Rear
Block heater