Problem with single blade T/B
Thread Starter
|
Senior Member
Joined: Feb 2002
Posts: 417
Likes: 0
From: Chandler,Az.
Problem with single blade T/B
I recently installed my BaBolt T/b from my '02 "L" to my new '03 HD F150.Somehow I messed up my TPS when I installed it.
Dealer replaced under warranty,but now the truck idles @ about 1100-1200 rpms in park and about 800-900 rpms in gear.[too high]
I have already backed out the idle screw on the back of the linkage.[it's not even touching]Could this be fixed by adjusting the TPS? I really hate to mess with it since I already broke one and they won't want to replace another one under warranty.
Thanks for any help!
Dealer replaced under warranty,but now the truck idles @ about 1100-1200 rpms in park and about 800-900 rpms in gear.[too high]
I have already backed out the idle screw on the back of the linkage.[it's not even touching]Could this be fixed by adjusting the TPS? I really hate to mess with it since I already broke one and they won't want to replace another one under warranty.
Thanks for any help!
Senior Member
Joined: Apr 2000
Posts: 5,438
Likes: 0
here ya go... a little step by step i did a while back!
https://www.f150online.com/forums/sh...threadid=66431
https://www.f150online.com/forums/sh...threadid=66431
