Guess what Im making?
Thread Starter
|
Suspended
Joined: Feb 2005
Posts: 94
Likes: 0
From: Michigan
Guess what Im making?
I have been thinking about doing this for a while, I finally got a chance to start.
Starting out with a 9.75X9X2 Piece of 7075 aluminum, Drilled and reamed 6 .250 holes.
Starting to look like something.
Done with the 2" cutter, .75 next.
.75 cutter done, .5 next
Starting out with a 9.75X9X2 Piece of 7075 aluminum, Drilled and reamed 6 .250 holes.
Starting to look like something.
Done with the 2" cutter, .75 next.
.75 cutter done, .5 next
Thread Starter
|
Suspended
Joined: Feb 2005
Posts: 94
Likes: 0
From: Michigan
I still have to engrave it, I spent about 10 hours making these 3 Ar-15 receivers and wanted to be done. It will be a few weeks before i get a chance to cut the other side of the receivers. here are a few other pics
the finish on them feels like a mirror, Its hard to tell in the pics
the finish on them feels like a mirror, Its hard to tell in the pics
Last edited by jmeyerholtz; Aug 22, 2009 at 03:28 AM.
Senior Member
Joined: Mar 1998
Posts: 1,719
Likes: 1
From: Blue Ridge Mountains, GA
I still have to engrave it, I spent about 10 hours making these 3 Ar-15 receivers and wanted to be done. It will be a few weeks before i get a chance to cut the other side of the receivers. here are a few other pics
the finish on them feels like a mirror, Its hard to tell in the pics
the finish on them feels like a mirror, Its hard to tell in the pics
x2 on the price lol
Senior Member
Joined: Feb 2008
Posts: 233
Likes: 0
From: wisconsin
Trending Topics
Thread Starter
|
Suspended
Joined: Feb 2005
Posts: 94
Likes: 0
From: Michigan
The piece of aluminum cost $45 dollars which is a great deal, and my work had an open mill and didn't care if i used it. Its legal to make your own firearms. If you can own it you can make it. You are allowed to sell it if you want but I cant make them to sell them, I would need a manufacturing license which can cost around 20K with all the inspections you need.
