Anther Icon Bites The Dust
Thread Starter
|
Senior Member
Joined: Jun 2007
Posts: 1,645
Likes: 0
Anther Icon Bites The Dust
Crane Cams shuts down, workers laid off
By JIM WITTERS
Senior Business Writer
DAYTONA BEACH — Crane Cams, a 56-year-old auto parts manufacturer, closed its doors this week and laid off its employees, a worker said today.
The news took Volusia County’s top economic development officer by surprise. City, county and state officials were working with Crane Cams and officials from its New Jersey parent, Mikronite Technologies, to keep the company open and in the community.
“We were trying to help them through this transition,” said Rick Michael, Volusia County economic development director. “They were considering a transfer of ownership. We were not expecting any closure.”
An automated voice mail system at Crane’s plant on Fentress Boulevard announced at midday today the company was closed and suggested calling back during business hours, 8 a.m. to 5 p.m. A call to Mikronite’s New Jersey offices produced similar results. Six cars sat in the parking lot early this afternoon at the local plant, which employed 220 just three years ago.
Inside the lobby, a reception desk sat empty. A call from the lobby phone got an answer from Dennis Burgess, who declined to comment and said no one at the plant could provide information.
In the parking lot, 14-year employee Ronald Dorn was leaving the plant for what he believed was the last time
He said workers were told during the past week that layoffs were likely, but he didn’t expect the plant to close.
Mikronite received approval in 2006 to receive tax rebates from the state and the county amid discussion about moving its New Jersey operations here. But the company ended its contract with the state in 2008 due to nonperformance, Michael said.
“Crane has gone through a series of small layoffs recently,” he said.
Crane Cams and Crane Technologies Group were founded by Harvey J. Crane Jr. in 1953 as Crane Engineering Inc. in Hallandale. The company is well known in high-performance and racing circles for its line of camshafts and engine valve train components.
In 1979, Crane Cams became an employee-owned company. Some operations moved to Daytona Beach in 1981, with the remainder of the operation and employees relocating here in 1985.
Mikronite, an industrial technology firm, bought Crane in 2006.
In March 2007, Mikronite sold its property on Fentress to STAG Capital Partners of Boston, then signed a 10-year lease.
http://www.news-journalonline.com/Ne...rane022409.htm
By JIM WITTERS
Senior Business Writer
DAYTONA BEACH — Crane Cams, a 56-year-old auto parts manufacturer, closed its doors this week and laid off its employees, a worker said today.
The news took Volusia County’s top economic development officer by surprise. City, county and state officials were working with Crane Cams and officials from its New Jersey parent, Mikronite Technologies, to keep the company open and in the community.
“We were trying to help them through this transition,” said Rick Michael, Volusia County economic development director. “They were considering a transfer of ownership. We were not expecting any closure.”
An automated voice mail system at Crane’s plant on Fentress Boulevard announced at midday today the company was closed and suggested calling back during business hours, 8 a.m. to 5 p.m. A call to Mikronite’s New Jersey offices produced similar results. Six cars sat in the parking lot early this afternoon at the local plant, which employed 220 just three years ago.
Inside the lobby, a reception desk sat empty. A call from the lobby phone got an answer from Dennis Burgess, who declined to comment and said no one at the plant could provide information.
In the parking lot, 14-year employee Ronald Dorn was leaving the plant for what he believed was the last time
He said workers were told during the past week that layoffs were likely, but he didn’t expect the plant to close.
Mikronite received approval in 2006 to receive tax rebates from the state and the county amid discussion about moving its New Jersey operations here. But the company ended its contract with the state in 2008 due to nonperformance, Michael said.
“Crane has gone through a series of small layoffs recently,” he said.
Crane Cams and Crane Technologies Group were founded by Harvey J. Crane Jr. in 1953 as Crane Engineering Inc. in Hallandale. The company is well known in high-performance and racing circles for its line of camshafts and engine valve train components.
In 1979, Crane Cams became an employee-owned company. Some operations moved to Daytona Beach in 1981, with the remainder of the operation and employees relocating here in 1985.
Mikronite, an industrial technology firm, bought Crane in 2006.
In March 2007, Mikronite sold its property on Fentress to STAG Capital Partners of Boston, then signed a 10-year lease.
http://www.news-journalonline.com/Ne...rane022409.htm
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
That's just sad. You did not talk cams back in the 60s thru thr 80s without Crane being mentioned. I have a Crane Fireball in my 65 Mustang.
__________________
Jim
Jim
Senior Member
Joined: Aug 1999
Posts: 1,506
Likes: 0
From: Bakersfield, CA, USA
That's too bad. Certainly an iconic firm.
FWIW, the only Crane cam I ever had was a bad match (too mild) for the rest of my built 289, but it was not their fault I bought the wimpy one.
FWIW, the only Crane cam I ever had was a bad match (too mild) for the rest of my built 289, but it was not their fault I bought the wimpy one.
