This has probably been done, but what's your other ride
Suspended
Joined: Nov 2007
Posts: 6,657
Likes: 0
no its does not count. 
sweet ride, but i have always wondered why do people put rims on their trailers?
my other ride is a 1975 Yota fj40 that is bare frame at the moment.
sweet ride, but i have always wondered why do people put rims on their trailers?
my other ride is a 1975 Yota fj40 that is bare frame at the moment.
Senior Member
Joined: Aug 2002
Posts: 705
Likes: 42
Certified Goat Breeder
Joined: Feb 1999
Posts: 6,182
Likes: 19
From: the moral high ground
Senior Member
Joined: Apr 2008
Posts: 433
Likes: 0
From: Auburndale
1981 El Camino, custom paint, custom interior, custom engine with a modified 350 & turbo 350 trans
Here is a burnout video
http://s239.photobucket.com/albums/f...t=burnout2.flv
These are the new 14" Cragar SST Rims and the deep offset I am running. This picture was before the center caps came in though.
And the burnout setup
Here is a burnout video
http://s239.photobucket.com/albums/f...t=burnout2.flv
These are the new 14" Cragar SST Rims and the deep offset I am running. This picture was before the center caps came in though.
And the burnout setup
Suspended
Joined: Nov 2007
Posts: 6,657
Likes: 0
heres a photo. except no axles underneath any more.
Specs as of now: SO lift (about 6") on 28's! just got crossover steering from 4x4 labs. have a stock 2f going back into it. picking up tranny in the morning from the rebuild. metaltech tube fenders, fj60 tilt steering column, saginaw powersteering conversion
Plans: 35's w/ 15" rims, Metaltech roll cage, 4.88's, locked front and rear, beige, line-x on inside of body, headers, winch, sliders, 5pt harness, racing seats in front, 2 seater racing seat in rear, front stinger, rear tire rack with gas can holder, roof rack, offroad lights
Specs as of now: SO lift (about 6") on 28's! just got crossover steering from 4x4 labs. have a stock 2f going back into it. picking up tranny in the morning from the rebuild. metaltech tube fenders, fj60 tilt steering column, saginaw powersteering conversion
Plans: 35's w/ 15" rims, Metaltech roll cage, 4.88's, locked front and rear, beige, line-x on inside of body, headers, winch, sliders, 5pt harness, racing seats in front, 2 seater racing seat in rear, front stinger, rear tire rack with gas can holder, roof rack, offroad lights
Last edited by 06yz250f; Feb 11, 2009 at 11:35 PM.
Senior Member
Joined: Oct 2003
Posts: 4,920
Likes: 5
From: Washington
heres a photo. except no axles underneath any more.
Specs as of now: SO lift (about 6") on 28's! just got crossover steering from 4x4 labs. have a stock 2f going back into it. picking up tranny in the morning from the rebuild. metaltech tube fenders, fj60 tilt steering column, saginaw powersteering conversion
Plans: 35's w/ 15" rims, Metaltech roll cage, 4.88's, locked front and rear, beige, line-x on inside of body, headers, winch, sliders, 5pt harness, racing seats in front, 2 seater racing seat in rear, front stinger, rear tire rack with gas can holder, roof rack, offroad lights
Specs as of now: SO lift (about 6") on 28's! just got crossover steering from 4x4 labs. have a stock 2f going back into it. picking up tranny in the morning from the rebuild. metaltech tube fenders, fj60 tilt steering column, saginaw powersteering conversion
Plans: 35's w/ 15" rims, Metaltech roll cage, 4.88's, locked front and rear, beige, line-x on inside of body, headers, winch, sliders, 5pt harness, racing seats in front, 2 seater racing seat in rear, front stinger, rear tire rack with gas can holder, roof rack, offroad lights
Suspended
Joined: Nov 2007
Posts: 6,657
Likes: 0
hey! don't be jealous!
im bringing the frame to a guy hopefully sunday or monday next week, hes welding on my motor mounts, sandblasting the frame, and painting the frame for me and for FREE. once i get it to a rolling chassis again with the engine, tranny, tcase in it ill start a build thread in the GD for those interested
im bringing the frame to a guy hopefully sunday or monday next week, hes welding on my motor mounts, sandblasting the frame, and painting the frame for me and for FREE. once i get it to a rolling chassis again with the engine, tranny, tcase in it ill start a build thread in the GD for those interested