F150online Forums

Let's start over......

   
Old Nov 28, 2012 | 08:22 AM
Share
  #79246  
1997 lariat 4.6's Avatar
Senior Member
10 Year Member
Joined: Dec 2011
Posts: 1,856
Likes: 4
From: Lovely Land of Iowa
 
Reply
0
Old Nov 28, 2012 | 08:23 AM
Share
  #79247  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by MTM Ford
Well, started spraying the exhaust manifold studs with PB Blaster. I'm going to try to do it every other night until I tear into it. Hopefully next weekend I can start it. I am NOT looking forward to doing the passenger side at all.....or the drivers side really Depending how long I have my buddies garage tied up I also planning on putting in new O2 sensors, PCV valve and clean the MAF and TB.

Personally I think I should be entitled to that garage anytime I please after this weekend. This weekend I'm helping him load and unload 300 bails of hay
You do not haveanactual PCV valve on the 5.4 3v. it is part of the valve cover all it is, is a restrictor in the baffles. the wires if you have them are a heating element that the computer turns on when it is below like 40 or 50degrees. no need to change it......but if you'd really like to then open yer wallet....

Note.....the 4.6 2v still have them though.....
 
Reply
0
Old Nov 28, 2012 | 08:26 AM
Share
  #79248  
1997 lariat 4.6's Avatar
Senior Member
10 Year Member
Joined: Dec 2011
Posts: 1,856
Likes: 4
From: Lovely Land of Iowa
Originally Posted by MTM Ford
Well, started spraying the exhaust manifold studs with PB Blaster. I'm going to try to do it every other night until I tear into it. Hopefully next weekend I can start it. I am NOT looking forward to doing the passenger side at all.....or the drivers side really Depending how long I have my buddies garage tied up I also planning on putting in new O2 sensors, PCV valve and clean the MAF and TB.

Personally I think I should be entitled to that garage anytime I please after this weekend. This weekend I'm helping him load and unload 300 bails of hay
psssh. nothin! heck it's even cold! you'll warm up and be fine! tell him he needs to come to IA to buy from me!
 
Reply
0
Old Nov 28, 2012 | 08:33 AM
Share
  #79249  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by Chris's FX4
That's so wrong but so right.....
 
Reply
0
Old Nov 28, 2012 | 09:12 AM
Share
  #79250  
Bluejay's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Mar 2005
Posts: 26,080
Likes: 85
From: Burleson/Athens/Brownsboro, TX
Originally Posted by 06F150STX
Got the parts table painted.
 
__________________
Jim
Reply
0
Old Nov 28, 2012 | 09:26 AM
Share
  #79251  
Rockpick's Avatar
Moderator &
Senior Member
Joined: Jan 2002
Posts: 31,440
Likes: 4
From: The Bluegrass State
**yawns**
 
Reply
0
Old Nov 28, 2012 | 09:51 AM
Share
  #79252  
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
My EVO CS will be here today.
 
Reply
0
Old Nov 28, 2012 | 10:02 AM
Share
  #79253  
Bluejay's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Mar 2005
Posts: 26,080
Likes: 85
From: Burleson/Athens/Brownsboro, TX
Originally Posted by Rockpick
**yawns**
Go back to bed.
 
__________________
Jim
Reply
0
Old Nov 28, 2012 | 10:21 AM
Share
  #79254  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by Rockpick
**yawns**
Name: icon_hijack.gif Views: 30 Size: 1.4 KB
 
Reply
0
Old Nov 28, 2012 | 10:23 AM
Share
  #79255  
1997 lariat 4.6's Avatar
Senior Member
10 Year Member
Joined: Dec 2011
Posts: 1,856
Likes: 4
From: Lovely Land of Iowa
Originally Posted by Rockpick
**yawns**
the beast has awakened! Hi RP!
 
Reply
0
Old Nov 28, 2012 | 10:51 AM
Share
  #79256  
Rockpick's Avatar
Moderator &
Senior Member
Joined: Jan 2002
Posts: 31,440
Likes: 4
From: The Bluegrass State
I am totally dragging a$$ today.
 
Reply
0
Old Nov 28, 2012 | 11:09 AM
Share
  #79257  
1997 lariat 4.6's Avatar
Senior Member
10 Year Member
Joined: Dec 2011
Posts: 1,856
Likes: 4
From: Lovely Land of Iowa
Originally Posted by Rockpick
I am totally dragging a$$ today.
drink some coffee, Monster, Redbull, or soda.
 
Reply
0
Old Nov 28, 2012 | 11:11 AM
Share
  #79258  
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
Originally Posted by 1997 lariat 4.6
drink some coffee, Monster, Redbull, or soda.
If all that fails, drink a beer!!!!
 
Reply
0
Old Nov 28, 2012 | 11:22 AM
Share
  #79259  
MTM Ford's Avatar
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
Originally Posted by 88racing
You do not haveanactual PCV valve on the 5.4 3v. it is part of the valve cover all it is, is a restrictor in the baffles. the wires if you have them are a heating element that the computer turns on when it is below like 40 or 50degrees. no need to change it......but if you'd really like to then open yer wallet....

Note.....the 4.6 2v still have them though.....
That's what I thought and why I never worried about it before. I was pokin' around on Rock Auto last night and came across a PCV valve for $12. So I came here and did a search thinking I was wrong and read it was in the valve cover and also read a few posts it was in the intake. I was a little intoxicated though so nothing was very clear
 
Reply
0
Old Nov 28, 2012 | 11:22 AM
Share
  #79260  
1997 lariat 4.6's Avatar
Senior Member
10 Year Member
Joined: Dec 2011
Posts: 1,856
Likes: 4
From: Lovely Land of Iowa
Originally Posted by 06F150STX
If all that fails, drink a beer!!!!
better yet! mix the beer with the energy drinks! you'll have the courage and energy to do it all!
 
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -4. The time now is 04:18 PM.