Let's start over......

Thread Tools
 
Search this Thread
 
Old Oct 14, 2011 | 11:47 PM
  #68266  
JackedUp99's Avatar
Senior Member
Truck of the Month
Joined: Dec 2009
Posts: 807
Likes: 0
From: 1hr east of St. Louis
Originally Posted by MTM Ford
I didn't know your truck was an XLT until now, I thought it was an FX4. Also didn't know it was a 4.5L
... I hate you, I got a bunch of all out hicks at my school that all they care about is huge supped up diesels and give me **crap** all the time about my 4.6 instead of anything bigger.

Btw 4.5L?
 

Last edited by JackedUp99; Oct 14, 2011 at 11:49 PM.
Reply
Old Oct 14, 2011 | 11:53 PM
  #68267  
JackedUp99's Avatar
Senior Member
Truck of the Month
Joined: Dec 2009
Posts: 807
Likes: 0
From: 1hr east of St. Louis
Yeah, just took it for another drove and the faster I go the better mpg's I get...

I alsways check manually so I'll find out soon enough but based on my gas gauge on my truck it's definitly not taking a major drop like it usually does if I floor it, much less 3 different times.
 
Reply
Old Oct 15, 2011 | 12:06 AM
  #68268  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by 06F150STX
Just drink some milk and eat some white bread. If you get sick, make yourself throw up. Get it out of your system if you inhaled to much of it. Just a heads up.
Beforehand is a actually better.....soon after will work also.....

If I know I am going to be welding that crap I'd drink a half gallon the night before and a half gallon the morning of the project......
 
Reply
Old Oct 15, 2011 | 12:09 AM
  #68269  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by shifty219
If you like those other dirt bike ones watch this one !!
http://www.youtube.com/watch?v=RH59GgSONwA
Tagged in the air.....whoops.....
 
Reply
Old Oct 15, 2011 | 12:09 AM
  #68270  
dsq3973's Avatar
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
I feel fine other than the headache I have had all day.
 
Reply
Old Oct 15, 2011 | 12:14 AM
  #68271  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by dsq3973
What symptoms should I be looking for just so I know?
Nausea and headaches ............sometimes body aches.......similar to the flu without the fever......

Welding it for a little bit you're probably safe......but if was an eight hour work day then you should really worry.....just depends on your bodies tolerance .....
 
Reply
Old Oct 15, 2011 | 12:16 AM
  #68272  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by MTM Ford
Spraying it with one of those Rus Free guns that hooks up to the air compressor. I can't wait to leave my mark in the parking lots at the stores
Kewl!

Brushing it would bite.....
 
Reply
Old Oct 15, 2011 | 12:23 AM
  #68273  
shifty219's Avatar
Senior Member
Joined: Dec 2008
Posts: 508
Likes: 0
From: Sault,ontario,CaNaDa
Dave, I would imagine for such a small job and as long as you werent hauling in the fumes for a high You will be fine
 
Reply
Old Oct 15, 2011 | 12:32 AM
  #68274  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by JackedUp99
Got my CTS installed today. All I can say is . Couple questions though: When I hooked it up to my computer it said I had 5 lvls (stock, tranny only, economy, performance, and extreme) but it just said 'demo' version, I assume it's obviously to just show it. When I plugged it in and got everything installed I only have "tranny only, tow, and extreme". Is there a way to get the other ones, because, correct me if I'm wrong, isn't it really not good to run extreme unless you have a pretty good modded engine?

So, for tonite I ran on tranny only and Jesus Christ! I love the difference, but you have to remember my truck was insanely slow (4.5L, 3.55, 35's). I plugged in my tire size but that's it and on my avg. Economy it said I was getting 16 on my trip, and I even did the 0-60 test and after that it was 17? Wth? I was getting 9 before so I feel like I DEFINITLY have to be missing something?

Any help/ comments appreciated.
I don't know why edge puts the diesel display crap on the gas cts.....its a different part number....it will changed when its plugged into the truck....and no those other canned tunes not available for gas trucks......

Always perform hand calculations for mileage instead of believing the pretty lie-o-meters.....


Double check the gear size its displaying to confirm......

This programmer you have is capable of programming ford gas vehicles since 1997 and chevy vehicles also......if you know what a hex code is ....and then figure out how many for each year of model from both manufacturers.......that's alot of vehicles these canned tunes have to be able to support.....
 
Reply
Old Oct 15, 2011 | 01:06 AM
  #68275  
TruckGuy24's Avatar
Senior Member
15 Year Member
Liked
Loved
Joined: Jan 2009
Posts: 10,730
Likes: 42
From: Concord, NC


I'm so sick of hw and tests. Did hw after work from 1015pm-1230am jsut to stay caught up.

Thursday night as I was leaving campus around 5pm to meet a friend for dinner the kid parked next to me at school had his hood open and I saw one of the police instance jumper boxes. It happened to me 2 years ago and it sucks so I offered to give him a hand. I could tell he was nervous about it and was so grateful. I couldn't get it to start so I offered to drive him up to the campus police station in the truck. He hopped in and they told him to call AAA. He didn't have a card on him, so I had him borrow mine and they told him an hour I offered to wait with him since it was raining and just had my friend meet me at school. The car was a rental since his was getting the water pump fixed I guess and AAA sent a local GM dealer service truck to jump him. The alternator and battery were good but the battery was completely drained. Took a few tries for the service guy to get him going, but his mid 90s v6 GMC 1500 got it going The kid was so thankful I helped him. I just feel bad leaving someone with car trouble. It was a 2 hour ordeal by the time we all left, but it was worth it.
 
Reply
Old Oct 15, 2011 | 01:09 AM
  #68276  
stoffer's Avatar
Senior Member
Truck of the Month
20 Year Member
Veteran: Army
Community Favorite
Joined: Apr 2004
Posts: 13,678
Likes: 82
From: missing Texas...
I just cost myself an Eaton install...
 
Reply
Old Oct 15, 2011 | 01:09 AM
  #68277  
stoffer's Avatar
Senior Member
Truck of the Month
20 Year Member
Veteran: Army
Community Favorite
Joined: Apr 2004
Posts: 13,678
Likes: 82
From: missing Texas...
so the green truck is going to be n/a for a while longer (it'll be worthwhile to the hot rod community in the end though)
 
Reply
Old Oct 15, 2011 | 01:15 AM
  #68278  
TruckGuy24's Avatar
Senior Member
15 Year Member
Liked
Loved
Joined: Jan 2009
Posts: 10,730
Likes: 42
From: Concord, NC
Turbo?
 
Reply
Old Oct 15, 2011 | 01:18 AM
  #68279  
stoffer's Avatar
Senior Member
Truck of the Month
20 Year Member
Veteran: Army
Community Favorite
Joined: Apr 2004
Posts: 13,678
Likes: 82
From: missing Texas...
Originally Posted by TruckGuy24
Turbo?


TVS 1900 for the 2 valve 5.4 motors...

















you're welcome hot rod community
 
Reply
Old Oct 15, 2011 | 01:21 AM
  #68280  
stoffer's Avatar
Senior Member
Truck of the Month
20 Year Member
Veteran: Army
Community Favorite
Joined: Apr 2004
Posts: 13,678
Likes: 82
From: missing Texas...
Originally Posted by TruckGuy24
Turbo?
IF i can sell this eaton setup I'm going with twin 67mm's
 
Reply



All times are GMT -4. The time now is 07:29 AM.