Let's start over......
Senior Member
Joined: Feb 2007
Posts: 4,535
Likes: 28
From: Lockport, La.
Put truck in the shop after work yesterday to get new tires mounted. Also needed new rear rotor's and pad's also had some slack in bearing. Found out that they sent the wrong bearing so now I have to wait till Monday to get the truck back. At least 3 different size bearings for these truck's.
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
Put truck in the shop after work yesterday to get new tires mounted. Also needed new rear rotor's and pad's also had some slack in bearing. Found out that they sent the wrong bearing so now I have to wait till Monday to get the truck back. At least 3 different size bearings for these truck's.
__________________
Jim
Jim
Senior Member
Joined: Feb 2007
Posts: 4,535
Likes: 28
From: Lockport, La.
Truck has 76k miles on the rear rotor's so I figured it was best to get them changed. Had the front changed at about 50k miles. The new Toyo MT's are heavy so I'll need all the braking power I can get!!
Senior Member
Joined: Apr 2004
Posts: 13,678
Likes: 82
From: missing Texas...
there's a picture of one installed on a lowered truck
Thread Starter
|
Senior Member
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
Go buy some clear silicone and seal her back up. Worked for me. 
Remove it, clean the surfaces, apply sealant to the gasket and re-install.
I need to wash mine tomorrow. I also need to remove some stuff I'm trying to sell.
Remove it, clean the surfaces, apply sealant to the gasket and re-install.
I need to wash mine tomorrow. I also need to remove some stuff I'm trying to sell.
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
I assume you silicone between the light housing and the metal?
__________________
Jim
Jim
Thread Starter
|
Senior Member
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
Gasket and metal roof. You'll see when you take the light off where to put the sealant.
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
Ok, thanks.
__________________
Jim
Jim
Senior Member
Joined: Jan 2009
Posts: 10,730
Likes: 42
From: Concord, NC
Begging? Crap I hope Blue is in a good day so I don't get banned. Maybe I should bring him a muffin at work on Monday to please him
you don't see the humor in John begging???? 
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
__________________
Jim
Jim
Making me hingry tho. I love corn muffins