Making a pickup a dump bed
Certified Goat Breeder
Joined: Feb 1999
Posts: 6,182
Likes: 19
From: the moral high ground
Yes there is but I only saw it for the Super Duty, Ford wise.
I don't think it's really cost effective for the Light duty F150 unless you happen to be a styrafoam deliveryman.
You would need an adequate payload (Super Duty) because the dump apparatus itself would eat into your payload numbers.
(I think it was a 'Northern Tool' catalog)
I don't think it's really cost effective for the Light duty F150 unless you happen to be a styrafoam deliveryman.
You would need an adequate payload (Super Duty) because the dump apparatus itself would eat into your payload numbers.
(I think it was a 'Northern Tool' catalog)
Last edited by Raoul; Dec 15, 2003 at 09:56 PM.
Senior Member
Joined: Oct 2002
Posts: 2,363
Likes: 0
From: Titusville, FL
Originally posted by Raoul
Yes there is but I only saw it for the Super Duty, Ford wise.
I don't think it's really cost effective for the Light duty F150 unless you happen to be a styrafoam deliveryman.
You would need an adequate payload (Super Duty) because the dump apparatus itself would eat into your payload numbers.
(I think think it was a 'Northern' catalog)
Yes there is but I only saw it for the Super Duty, Ford wise.
I don't think it's really cost effective for the Light duty F150 unless you happen to be a styrafoam deliveryman.
You would need an adequate payload (Super Duty) because the dump apparatus itself would eat into your payload numbers.
(I think think it was a 'Northern' catalog)
Certified Goat Breeder
Joined: Feb 1999
Posts: 6,182
Likes: 19
From: the moral high ground
My bad, it's only 180 pounds...($869.00)
Let us know if you do it.
http://www.northerntool.com/webapp/w...ategoryId=1535
Let us know if you do it.
http://www.northerntool.com/webapp/w...ategoryId=1535
Thread Starter
|
Member
Joined: Jun 2002
Posts: 19
Likes: 0
Thanks for that link! I will let you know. Thing is, I have to decide if I want it in my F150 or my F250.
