Hello all, new member here ,looking for some help ,I have a 2016 f250 lariat/ c.c/ FX4/ 6.7 and while doing some mods with forscan I enabled ambient light in the my ford touch( MFT) and that got me looking for the lights and my truck is not equipped with them or the wiring.so I would like to add them .my questions are what plug and pin's would I need to add pigtails to to add the power for lights? I bought a wire diagram book for the f250s and I can find ambient lights in sccm (steering column control mod) plug C2414A(14401) and instrument panel dimmer plug C2065 (14401) I read a article where some one did this on a 2015 f150xlt (OEM Ambient Lighting Installed in 2015 XLT, MFT Controlled, Success - Ford F150 Forum - Community of Ford Truck Fans) .I compared pics of bcm and mine isn't the same...I guess I need to know where the data bus wires and 12v power supply are in my bcm and what plugs they are in ,to add pigtails to make up my own harness , so if anyone can help steer me in the right direction with this project I would be very thankful
Thanks