DR/Icon 4.5" Installed...
DR/Icon 4.5" Installed...
Got a killer deal on a used kit; its been sitting in my basement for a couple months now and I finally found some time to install it...
The install was pretty simple and took me and my Dad about 5-6 hours to put on. The radius arm brackets were the hardest part but wasn''t too bad.
Also for the rear I still have F350 blocks and an AAL... didn't get to install the 5" blocks because the u-bolts I got were too short (probably because of the overload springs)... will have to get a set ordered up this week.


The install was pretty simple and took me and my Dad about 5-6 hours to put on. The radius arm brackets were the hardest part but wasn''t too bad.
Also for the rear I still have F350 blocks and an AAL... didn't get to install the 5" blocks because the u-bolts I got were too short (probably because of the overload springs)... will have to get a set ordered up this week.


Thanks...
I have some 35x12.50 Cooper STTs sitting in my basement that I'll run during the summer. They don't as well on hard packed snow/ice. I do need to get some wheels though... not sure what.
I have some 35x12.50 Cooper STTs sitting in my basement that I'll run during the summer. They don't as well on hard packed snow/ice. I do need to get some wheels though... not sure what.
nice, are those 08 tails? I was thinking about doing that but wasn't sure if they just bolt up or not
Trending Topics
I really like the way they look and they put out a bit more light when reversing than the stock ones.



