1999 7.3 F-250 Programmer question
Thread Starter
|
Member
Joined: Mar 2006
Posts: 20
Likes: 0
From: California
1999 7.3 F-250 Programmer question
So I have a 1999 F-250 7.3 with a 4" turbo back exhaust. I wanted to know what would be the best intake and programmer to get with this set up.
Thanks,
Rick
Thanks,
Rick
Senior Member
Joined: Aug 2000
Posts: 2,946
Likes: 0
From: Right Coast
Best intake is a DIY with a Green filter or a PG7 media from AFE. There is no reason to buy a $400 intake for a 7.3L when the same thing can be made for less than $100. Cost may fluctuate some depending on if you have an early or a late 99.
Skip the programmer completely. Instead go to www.dp-tuner.com and give Jody a call. He will set you up with what you need. If you have an automatic I suggest a PMT1 PCM to go with it. The trans shifts are very nice.
Skip the programmer completely. Instead go to www.dp-tuner.com and give Jody a call. He will set you up with what you need. If you have an automatic I suggest a PMT1 PCM to go with it. The trans shifts are very nice.
Member
Joined: Oct 2004
Posts: 70
Likes: 0
From: norhtern, IL
I agree with the DP-Tuner chip comment, as well as the DIY "Tymar style" intake. IMO I do not like washable/oiled filter media on a turbodiesel. I prefer the dry Donaldson filter like is used by Tymar.