Az Beige Splashguards
Thread Starter
|
Senior Member
Joined: Apr 2001
Posts: 317
Likes: 0
From: Cypress, TX
Az Beige Splashguards
I remember there was a thread about this a while back.
Anyway, here is the PN for the AZ beige spach guards.
16A880 Az.Beige Molded Splash Guards.
Later
Greg
Anyway, here is the PN for the AZ beige spach guards.
16A880 Az.Beige Molded Splash Guards.
Later
Greg
Thread Starter
|
Senior Member
Joined: Apr 2001
Posts: 317
Likes: 0
From: Cypress, TX
No pics that I know of.
I have seen them on an X, and they look a little TOO "ground effect-ish" for me.
If you have a dark color ride, then the black molded is the way to go.
In addition, since the Az.Beige flaps are a molded plastic, and getting put right up against the beige on the EB wheel well moldings, you run the risk of colors not matching right.
Keep in mind that the F/R bumpers and running boards on the EB are not mounted up against a part of the body that is the painted AzBeige.
Greg
I have seen them on an X, and they look a little TOO "ground effect-ish" for me.
If you have a dark color ride, then the black molded is the way to go.
In addition, since the Az.Beige flaps are a molded plastic, and getting put right up against the beige on the EB wheel well moldings, you run the risk of colors not matching right.
Keep in mind that the F/R bumpers and running boards on the EB are not mounted up against a part of the body that is the painted AzBeige.
Greg