Expedition / Navigator

Check Suspension light

Thread Tools
 
Search this Thread
 
Old Aug 10, 2008 | 01:47 AM
  #1  
subnoob's Avatar
Thread Starter
|
Member
Joined: Feb 2008
Posts: 74
Likes: 0
From: Mcallen,Tx
Check Suspension light

What does it mean?? Its a 2000 5.4L expedition, 4WD with 156K miles. Is it the airbags?
 
Reply
Old Nov 9, 2008 | 10:37 AM
  #2  
4GIVEN's Avatar
Member
Joined: Dec 2006
Posts: 39
Likes: 0
From: Dillsburg, Pa.
I have a 98 navigator with the air-ride and my light just came on too. Now I just had my rear shocks replaced and thats when the light came on. I just found out that there are 2 types of shocks that go to this thing. 1 for air-ride and 1 for non air-ride. I have no clue whats the difference between the two but I'm trying to find out. I'll let you know what I find.
 
Reply
Old Nov 28, 2008 | 01:11 PM
  #3  
2000Expedition's Avatar
Joined: Oct 2004
Posts: 94
Likes: 0
From: nj
Check the switch first, off and on under the glove compartment above the side kick protection on the right.

Then check the fuses.

Is it sagging? Is the compressor running alot?

Advise
 
Reply
Old Dec 16, 2008 | 04:58 PM
  #4  
shnecky's Avatar
Junior Member
Joined: Dec 2008
Posts: 1
Likes: 0
Navigator

I am having the same problem with my 2005 Navigator (check suspension) light and front end stays lowered. if i pour or spray hot water on the wheel wells it will raise back up and stay up in the front. Could it be the ride height sensors or am i looking at a major repair? It started doing this once the temperatures dropped that's why i figured hot water might help.... any help or insight would be great!
 
Reply




All times are GMT -4. The time now is 04:55 PM.