Exhaust & Intake Systems
Sponsored by:
Sponsored by: Real Truck

97 f150 exhaust questions

Old Aug 26, 2009 | 08:47 PM
  #1  
mpiller's Avatar
Thread Starter
|
Member
Joined: Aug 2009
Posts: 28
Likes: 0
97 f150 exhaust questions

Hi, this is my first post here, but I have been reading through the forums for a while now and they have been very helpfull. I have a 97 f150, the only performance add ons it has is a k n' n air intake, and a flowmaster exhaust dumped out the side right before the wheel. At first I thought this was cool because it was'nt very common, but I like things to be even so I woul like to go to something with a tip on each side, but you can't put another tip on the left side because of the gas tank so I will probly go with chrome tips at 45* out the back. But heres my question, I don't mind the sound but would like it to be a little louder when I change it, and was wondering what I could do to get more performance from it? I was thinking true duels with an H pipe, and maybe no muffler, or just two dynomax bullets. How would this be performance wise? Does anybody have any other suggestions? Maybe just duels with an H pipe and no muffler?
Thanks for any info
 
Reply
Old Aug 26, 2009 | 08:52 PM
  #2  
migdaddy's Avatar
Senior Member
Joined: Feb 2009
Posts: 4,624
Likes: 1
From: Boise, ID
true duals with an H pipe and dynomax bullet is an AWESOME setup. i would highly recommend it.

true duals with no muffler has no tone. it will be just noise. bullets have straight pipe (no muffler) volume, but a deep aggressive tone, and will gain performance over your flowmaster system.
 
Reply
Old Aug 26, 2009 | 10:08 PM
  #3  
mpiller's Avatar
Thread Starter
|
Member
Joined: Aug 2009
Posts: 28
Likes: 0
ok thanks, did you install them on your truck by yourself or did you have a shop do it? If you installed them how hard was it?
Thanks
 
Reply
Old Aug 27, 2009 | 01:58 AM
  #4  
migdaddy's Avatar
Senior Member
Joined: Feb 2009
Posts: 4,624
Likes: 1
From: Boise, ID
haha i would never weld an exhaust together myself. a shop did it. $200 bucks
 
Reply
Old Aug 27, 2009 | 02:20 AM
  #5  
thejake1989's Avatar
Technical Article Contributor
Joined: Feb 2008
Posts: 8,673
Likes: 0
From: Rosenberg/Baytown TX
i agree with the bullet setup. the flow through sounds great
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:22 PM.