JBA shorty problems
Thread Starter
|
Member
Joined: Apr 2006
Posts: 58
Likes: 0
From: Nor Cal, Auburn-Grass Valley
JBA shorty problems
anyone have problems with JBA's on their 3v 5.4's? Mine have a leak on both sides somewhere above the collector, so i was gunna call JBA and try and get some gaskets and see if that fixes it, any solutions?
Last edited by 04FiveFour; Oct 10, 2007 at 11:27 PM.
Senior Member
Joined: Sep 2003
Posts: 137
Likes: 0
From: Hellertown, PA
Maybe I don't understand where on the header your talking about, but above to collector is the tubes and I don't see how a gasket will fix that. Are you talking about a leak along the flange? JBA headers have a lifetime warranty.
02 F150 Super Crew Lariat FX4 White & Silver
5.4 /w Roush Cold Air Intake & K&N filter
3.55 LS
Flowmaster Cat Back
JBA Silver Cat4ward Headers
Rancho RSX's
Rancho Steering Stablizer
Hellwig Rear Anti Sway Bar
Lightning Tails
Outland Sport Bumper Guard
Hella 550's
Silverstars
Superchips 9100 Micro Tuner c/o Troyer Performance
Underdrive Pullies c/o Troyer Performance
Mag-Hytec Trans Pan
02 F150 Super Crew Lariat FX4 White & Silver
5.4 /w Roush Cold Air Intake & K&N filter
3.55 LS
Flowmaster Cat Back
JBA Silver Cat4ward Headers
Rancho RSX's
Rancho Steering Stablizer
Hellwig Rear Anti Sway Bar
Lightning Tails
Outland Sport Bumper Guard
Hella 550's
Silverstars
Superchips 9100 Micro Tuner c/o Troyer Performance
Underdrive Pullies c/o Troyer Performance
Mag-Hytec Trans Pan
Thread Starter
|
Member
Joined: Apr 2006
Posts: 58
Likes: 0
From: Nor Cal, Auburn-Grass Valley
yeah it must be along the flange, and the lifetime warranty is out the window for me...i'm not the original owner and my truck had em when i bought it so JBA told me that it was non transferable
Senior Member
Joined: Sep 2003
Posts: 137
Likes: 0
From: Hellertown, PA
That sucks! When I did mine, the first set of flange gaskets that came with the headers were Mr. Gasket metal impregnated gaskets...top of the line stuff. I had a coating failure on the headers and the replacements came with Percy's XX Carbon Gaskets
You might want to try just tightening the bolts on the flange. Or are you sure there is a crack?
02 F150 Super Crew Lariat FX4 White & Silver
5.4 /w Roush Cold Air Intake & K&N filter
3.55 LS
Flowmaster Cat Back
JBA Silver Cat4ward Headers
Rancho RSX's
Rancho Steering Stablizer
Hellwig Rear Anti Sway Bar
Lightning Tails
Outland Sport Bumper Guard
Hella 550's
Silverstars
Superchips 9100 Micro Tuner c/o Troyer Performance
Underdrive Pullies c/o Troyer Performance
Mag-Hytec Trans Pan
You might want to try just tightening the bolts on the flange. Or are you sure there is a crack?02 F150 Super Crew Lariat FX4 White & Silver
5.4 /w Roush Cold Air Intake & K&N filter
3.55 LS
Flowmaster Cat Back
JBA Silver Cat4ward Headers
Rancho RSX's
Rancho Steering Stablizer
Hellwig Rear Anti Sway Bar
Lightning Tails
Outland Sport Bumper Guard
Hella 550's
Silverstars
Superchips 9100 Micro Tuner c/o Troyer Performance
Underdrive Pullies c/o Troyer Performance
Mag-Hytec Trans Pan
Thread Starter
|
Member
Joined: Apr 2006
Posts: 58
Likes: 0
From: Nor Cal, Auburn-Grass Valley
I don't know for sure if i have a crack in the header, i was gunna replace the gaskets and inspect for cracks when i was in there, every other truck i've ever had with headers has had leaks, and their always different so i figured that i could gather some info from fellow enthusiasts
Thread Starter
|
Member
Joined: Apr 2006
Posts: 58
Likes: 0
From: Nor Cal, Auburn-Grass Valley
so i caleld JBA west down in san diego and their sendin me some...28 bucks for both and they should be here in a few days...guess we'll see what happens when i put em in.
