Post Magnaflow install question
Thread Starter
|
Technical Article Contributor
Joined: Sep 2004
Posts: 81
Likes: 0
From: Indiana
Post Magnaflow install question
Had this exhaust installed,
http://www.magnaflow.com/07techtips/pdfs/15821.pdf
and am seeing water dripping from the clamps on the intermediate pipe on both the muffler end and the catalytic end. I know that water is a byproduct and is normal to see, especially from tailpipe, but wondering if this is normal. Since I just had this installed and I don't remember looking for or seeing this with the stock exhaust, is water dripping from around these clamps normal? Or is there a leak and I should go back to the installer and have them tightened? Thanks!!
http://www.magnaflow.com/07techtips/pdfs/15821.pdf
and am seeing water dripping from the clamps on the intermediate pipe on both the muffler end and the catalytic end. I know that water is a byproduct and is normal to see, especially from tailpipe, but wondering if this is normal. Since I just had this installed and I don't remember looking for or seeing this with the stock exhaust, is water dripping from around these clamps normal? Or is there a leak and I should go back to the installer and have them tightened? Thanks!!
Senior Member
Joined: Jan 2005
Posts: 1,565
Likes: 1
From: San Antonio Tx
I think you're fine. My Magnaflo SI/DO has been on for a year now and it does the same thing. I had mine professionally installed (by a friend of mine in the business) and its always done it. Have checked and there are no exhaust leaks around the clamps so its all good. Enjoy the sound! 
