I have never done or had someone else do exhaust work on anything. So I have a simple question. My stock pipe is 2.5". Is it possible to weld a tip with a 3" diameter inlet onto the 2.5" pipe? This would seem pretty simple to me since that's only a 1/4" gap.

Thanks for the help.

 

they do make 2.5 to 3 inch tips, theyre probably 5-15.00 depending on the store you go to.

 

A good exhaust shop can do just about anything.

A great exhaust shop CAN do anything.

Good luck.

 

Not only is it possible, its easy. ALso, pipes can be expanded to some degree. I have 3 inch pipes and 2.5 inch inlet/outlet mufflers with 2.5inch tips