Ok so whats the trick to removing an 11 year old O2 sensor? You would think that since the exhaust heats up to 300 degrees everytime i drive it wouldn't rust itself in there.

 

When I changed the one on my '92, I drove until the exhaust was warmed up and I then heated the bung with a torch a little bit. Still stubborn... so I used a 3/4" drive socket wrench with a universal and a pipe extension handle. hmmmmm - then she came right out.

Have fun,
Crotteau

------------------
1997 F150 4x4

4.2L V6
Open Filter Housing
K&N Filter

Factory 5-Speed

3.08 Gears

3" PA Body Lift

305/70/16 Goodyear AT/S
16x8 American Racing Baja

 

i used a ratchet with a pipe handle too. came right out. good luck!

------------------
1989 F-150 XLT Lariat: 2WD 302 5spd[*]Performance Accessories 3" Body Lift[*]33x12.50.15 BFG A/T's on 15x10 AR Rims[*]Rancho Steering Stabilizer[*]Rancho RS 5000 Shocks[*]K&N Air Filter[*]Gutted Cats with Straight Pipes For Now...

Go Full Speed or Go Home!