Some car audio things
#1
10-10-2011, 10:44 PM
Some car audio things
Well I'm trying to go bigger so all my old stuff has to got to go unfortunately, I'd prefer local pick up on somethings but if you wanna pay shipping I'm sure I can find a way to get it to you!
1. First I have a set of dual 2 kicker 10" CVRs in a bandpass box, these things will hit. Each sub will do 400rms so you can wire both to see 800rms at 2ohms. The bandpass box makes them even louder and deeper. One of the subs had a broken tinsel lead on it but it's been hard wired to a 4ohm final load so you can still get a 2ohm load across the whole box of of each. The box shows some minor scratches on the plexi but nothing to major. $125obo
http://www.kicker.com/compvr_aluminized
2. Also a Ascendant Audio Assassin 10" single 4ohm. This is a great little sub, it's rated at 250rms but it'll eat power and keep wanting more. It's a pretty good all around sub it does great for the highs and it'll still get low. Note this is the old style of the sub before they put the logo on the dustcap. $65obo
http://www.ascendantaudio.com/assasin.php
3. I have a hifonics brutus bxi 1210d amp, it's 1ohm stable meaning it'll do 1200rms at 1ohm with 2400 peak watts. The amp is maybe a year old at the most, but I've never had a problem with it. Everythings been ran at the proper ohm load on it and never pushed too hard, meaning I always kept the gain back enough to prevent clipping. SOLD
http://www.sonicelectronix.com/item_...BXi-1210D.html
4.Also my SSA Icon 10" dual 1 sub for sale, for those of you who have never heard of this you should know this thing hits! It'll get lower than most 12's out there and still be able to stay tight at the higher notes. This one sub put my two kicker 10's I had before it to shame. It's rated at 1000rms and 2000peak but it'll take well over that and keep going. I babied this sub only pushing 900rms too it though, and it was only used for about 3 months so it's still like new. All the rubber is still firm, it's barely through its break in period. It's in a sealed box right now that's at about .85 cubic feet right below the .9 cubic feet recommend for optimal sealed. In the picture the sub has some dust on it but all that can be wiped off, the cone and motor all look like new. The Box has some fresh carpet on it now! These retail alone for $255 and the sub weighs 32 pounds, this is one massive ten that would destroy most others. I also have a ported box I built for it, it's about 1.35cf at 32hZ. It's not the prettiest one ever but it works! $150
http://www.soundsolutionsaudio.com/i...tion/icon.html
Feel free to offer on things too! And you can either post here or pm me, but I'll probably get back to you faster if you send a pm also!
EDIT: Amps been sold. Everything else is currently listed on ebay, pm me if you want a direct link to it.
1. First I have a set of dual 2 kicker 10" CVRs in a bandpass box, these things will hit. Each sub will do 400rms so you can wire both to see 800rms at 2ohms. The bandpass box makes them even louder and deeper. One of the subs had a broken tinsel lead on it but it's been hard wired to a 4ohm final load so you can still get a 2ohm load across the whole box of of each. The box shows some minor scratches on the plexi but nothing to major. $125obo
http://www.kicker.com/compvr_aluminized
2. Also a Ascendant Audio Assassin 10" single 4ohm. This is a great little sub, it's rated at 250rms but it'll eat power and keep wanting more. It's a pretty good all around sub it does great for the highs and it'll still get low. Note this is the old style of the sub before they put the logo on the dustcap. $65obo
http://www.ascendantaudio.com/assasin.php
3. I have a hifonics brutus bxi 1210d amp, it's 1ohm stable meaning it'll do 1200rms at 1ohm with 2400 peak watts. The amp is maybe a year old at the most, but I've never had a problem with it. Everythings been ran at the proper ohm load on it and never pushed too hard, meaning I always kept the gain back enough to prevent clipping. SOLD
http://www.sonicelectronix.com/item_...BXi-1210D.html
4.Also my SSA Icon 10" dual 1 sub for sale, for those of you who have never heard of this you should know this thing hits! It'll get lower than most 12's out there and still be able to stay tight at the higher notes. This one sub put my two kicker 10's I had before it to shame. It's rated at 1000rms and 2000peak but it'll take well over that and keep going. I babied this sub only pushing 900rms too it though, and it was only used for about 3 months so it's still like new. All the rubber is still firm, it's barely through its break in period. It's in a sealed box right now that's at about .85 cubic feet right below the .9 cubic feet recommend for optimal sealed. In the picture the sub has some dust on it but all that can be wiped off, the cone and motor all look like new. The Box has some fresh carpet on it now! These retail alone for $255 and the sub weighs 32 pounds, this is one massive ten that would destroy most others. I also have a ported box I built for it, it's about 1.35cf at 32hZ. It's not the prettiest one ever but it works! $150
http://www.soundsolutionsaudio.com/i...tion/icon.html
Feel free to offer on things too! And you can either post here or pm me, but I'll probably get back to you faster if you send a pm also!
EDIT: Amps been sold. Everything else is currently listed on ebay, pm me if you want a direct link to it.
Last edited by pizzaman711; 10-15-2011 at 03:22 PM.
#2
10-15-2011, 03:23 PM