I have a 92 F150 and I need to know the procedure for removing the driver side power window motor. I have the door trim off.It looks like it has 3 mounting screws but I can't get to one of them.Any help would be appreciated.

 

i own a 94 f 150 and when i replaced my motor my instructions showed me where to drill a hole in the inside door panel to get access to that screw.


hope it helps
the donald

 

I use a 3/4 in. bit. The door is marked with punch type indentions for locating the drill points. A 5/16 1/4 drive socket will remove the bolts.

 

Thanks Guys, I got the motor out .Next question.Where do I find a gear kit? The motor works fine up/down.But the gear that rides on the worm gear is shot. Thanks again!

 

Here in Wichita I get gear kits from both Ford and aftermarket sources. Either one works fine so far.