Keyless entry module

Thread Tools
 
Search this Thread
 
  #1  
Old 07-17-2023, 10:28 AM
Phillip10F150's Avatar
Junior Member
Thread Starter
Join Date: Jul 2023
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Keyless entry module

I have a 2010 F150 XLT crew cab. The 20A fuse blows for the power door locks it seems more often when trying to unlock the door with the key fob and with interior door lock/ unlock buttons. Could a faulty keyless entry module cause this? I have disconnected all 4 door actuators and used the key fob; fuse blew. Is the key pad on the drivers door tied into this same fuse? Thats the one component I didn't disconnect. Much help appreciated.
Phiilp
 
  #2  
Old 07-17-2023, 02:26 PM
glc's Avatar
glc
glc is offline
Senior Member
Join Date: Dec 2006
Location: Joplin MO
Posts: 43,212
Received 763 Likes on 706 Posts
Which fuse? F17 in the interior fuse box?
 
  #3  
Old 07-17-2023, 04:07 PM
Phillip10F150's Avatar
Junior Member
Thread Starter
Join Date: Jul 2023
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Yes. 17 in interior fuse box.
 
  #4  
Old 07-17-2023, 05:18 PM
projectSHO89's Avatar
Senior Member
Join Date: Oct 2002
Location: St. Louis (Out in the woods)
Posts: 7,247
Likes: 0
Received 104 Likes on 97 Posts
Keyless entry module
Your truck doesn't have one of those, the RKE function is integrated into the Smart Junction Box (SJB).

Most likely, you have a wire to one of the door lock actuator motors shorted to ground. It is certainly possible that there is a fault in the SJB causing the issue, but odds are better that it's a wiring issue.



 

Last edited by projectSHO89; 07-17-2023 at 05:24 PM.



Quick Reply: Keyless entry module



All times are GMT -4. The time now is 08:18 PM.