From the blinkers not working
Thread Starter
|
Junior Member
Joined: May 2018
Posts: 3
Likes: 0
Front blinkers not working
Ok so i put some retro fit headlights on my 2014 lariat with some switchback led strips inside the headlights and they worked fine for like the first month then all of a sudden the front blinkers stopped working, the parking lights work but not the blinkers I have ran through every possible solution and couldn’t figure it out but I did find that the wire that sends the signal for the blinkers have no power at all
Last edited by Johnny Vis; May 25, 2018 at 11:09 AM.
Technical Article Contributor
Joined: Jan 2007
Posts: 10,636
Likes: 264
From: Vernon, NY
A DMM is a digital multimeter... AKA a Fluke meter, volt meter, etc.
You'll want to check to see if you have corresponding voltage. If you don't you can then do some other tests with it to determine the fault.
You'll want to check to see if you have corresponding voltage. If you don't you can then do some other tests with it to determine the fault.