power driver seat & mirrors not working

Thread Tools
 
Search this Thread
 
Old Oct 24, 2010 | 07:35 PM
  #1  
bluegrizzly's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 30
Likes: 0
From: Washington, B.C. border..wooohoo
power driver seat & mirrors not working

2004 lariat supercrew. I checked the fuse box and the cover called for # 3 5 amp. Fuse but it looks to be OK. Im thinking My lab puppy could be the culprit but no wires look to be chewed under the seat but I did find a small 1 inch piece of hollow rubber gunning and I don't know where the piece came from. Hoping for some help. I'm new to WA state. And flat broke til the 3rd. Thanks
 
Reply
Old Oct 24, 2010 | 07:40 PM
  #2  
bluegrizzly's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 30
Likes: 0
From: Washington, B.C. border..wooohoo
I meant a small 1 inch piece of hollow rubber tubing .
 
Reply
Old Oct 24, 2010 | 09:27 PM
  #3  
SSCULLY's Avatar
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
IF the fuses test good with a meter, next is to check the driver's side door sill for a problem splice.

Here is a thread that describes the issue, and location of the splice(s)

https://www.f150online.com/forums/el...ical-help.html

Another member had this a few days back ( might still be on the 1st page of this forum ) and the splice was buried in the bundle about 1" from the c-pillar on his SuperCrew.
 
Reply
Old Oct 26, 2010 | 02:44 AM
  #4  
bluegrizzly's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 30
Likes: 0
From: Washington, B.C. border..wooohoo
I forgot to mention that the passenger seat works fine. Only the driver power seat is out and rhe mirrors. I have that thread saved but how do u open that small fuse box under the hood on my 04 lariat crew? Had a heck of a time bring a moron
 

Last edited by bluegrizzly; Oct 26, 2010 at 02:48 AM.
Reply
Old Oct 26, 2010 | 03:20 AM
  #5  
maxepotter's Avatar
Junior Member
Joined: Oct 2010
Posts: 1
Likes: 0
Thanks for sharing the useful information with all.That helped me a lot, it was all very specific.You have done an great job.Such an informative and well formed post!Thanks again for sharing that, it was wonderful of you.
 
Reply




All times are GMT -4. The time now is 10:29 PM.