Hi folks.

I have a 2000 F-150 and did the fog light mod as shown here:
http://www.svtlightnings.com/svt/how...s/foglamps.htm
about 10 years or so ago when I bought the truck.

Everything has worked fine with no issues. Today I took the truck to be inspected and it was rejected due to the fog lights staying on when the high beams are on.

The guy was a real #$%^ and I had it inspected there last year with no issues.

Anyways. I "undid" the mod in regards to the spliced connection between the #2 and #12 wires on the back of the switch. Now my fog lights do not come on at all, which still will no pass inspection.

How can I reverse this mod so that my fog lights return to the factory setting?

I really need to get this done tonight so I can get it back there tomorrow for re-inspection.

Thanks!

 

Disregard!

Did some further research and found the #27 fuse also had to be pulled this was not included in the original write up.

All is back to normal....

Until I get it back tomorrow!