Brake lights, Cruise and RFI module

Thread Tools
 
Search this Thread
 
Old Sep 20, 2010 | 12:45 PM
  #1  
Jim Blackwood's Avatar
Thread Starter
|
Senior Member
15 Year Member
Joined: Nov 2006
Posts: 148
Likes: 1
Brake lights, Cruise and RFI module

I had the dash out to replace the heater core, now the brake lights and cruise control don't work. From the wiring diagram I see that power for both systems comes through the RFI module which is supposed to be located "in the vicinity of the steering column" and has a 10 pin dual inline plug. I suspect this module didn't get plugged back in but so far I've been unable to find it. Anybody know what it looks like or exactly where it is located? Thx. JB
 
Reply
Old Sep 20, 2010 | 12:48 PM
  #2  
SSCULLY's Avatar
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
How about some specifications on the truck ?
 
Reply
Old Sep 20, 2010 | 01:34 PM
  #3  
Jim Blackwood's Avatar
Thread Starter
|
Senior Member
15 Year Member
Joined: Nov 2006
Posts: 148
Likes: 1
Nevermind... I found it. A socket up above the diagnostic port. Problem solved.

JB
 
Reply




All times are GMT -4. The time now is 10:03 AM.