Anyone have a wiring diagram?
I'm currently installing a Python alarm system and I haven't been able to install the door triggers or power door lock/unlock. Anyone have the wiring diagram for a 01 F150? The paper (cheat sheet) I have doesn't give the correct information.
Thanks,
------------------
Adam
01 Black Lightning - JDM 'FlipChipenfiltered','Straightpiped', 'splitfired', 'billetted', 'Neoned', and 'Grooved' thanks to Blaupunkt, Alpine, Sony, Clarion, Dynomat, and MTX
Thanks,
------------------
Adam
01 Black Lightning - JDM 'FlipChipenfiltered','Straightpiped', 'splitfired', 'billetted', 'Neoned', and 'Grooved' thanks to Blaupunkt, Alpine, Sony, Clarion, Dynomat, and MTX
I do not have a wiring diagram, but may be avle to help. I was just playing last night and removed the "door lock/windows up&down button console" in the door trim. You may be able to check there for the correct wires.
You remove it by using a standard screwdriver (with a towel under it so you don't scrath the trim) and wedge it on the FORWARD section of the trim and pry it up. The latch is located towards the front of the console. The rear part is just a hinge so don't pry there.
Hope this helps
------------------
2001 F150 XLT Supercab Flareside "Sport"
Black
5.4
Smittybilt step bars
You remove it by using a standard screwdriver (with a towel under it so you don't scrath the trim) and wedge it on the FORWARD section of the trim and pry it up. The latch is located towards the front of the console. The rear part is just a hinge so don't pry there.
Hope this helps
------------------
2001 F150 XLT Supercab Flareside "Sport"
Black
5.4
Smittybilt step bars


