WHATS UP GUYS/GALLS I JUST INSTALLED AN XTUNE BI XENON H13 HI/LO KIT IN MY 06 FX4 SCAB AND IVE BEEN HAVING ISSUES WITH ONE OF THE LIGHTS STAYING ON. I BOLTED THE BALLASTS ON THE FRONT RADIATOR CROSS MEMBER DIRECTLY UNDERNEATH THE FRONT FENDER LIPS ITS A SWEET *** LOCATION BUT I AM HAVING EXTREME ISSUES. I LIVE UP HERE IN ALASKA AND BEING THAT ITS DARK FROM ABOUT 3 IN THE AFTERNOON TILL ABOUT 11 IN THE MORNING I NEED SOME LIGHTS THAT CAN GIVE ME CLEAR VISION. MY ISSUES ARE THAT AFTER I INSTALLED THE KIT ONE LIGHT (drivers side) WORKS FINE, THE PASSENGER SIDE HOWEVER IS EXTREMELY FINNICKY! I HAVE TRIED TROUBLESHOOTING THIS PROBLEM FOR THE LAST THREE DAYS AND UNFORTUNATELY I DONT HAVE A GARAGE SO I HAVE TO PAY FOR TIME IN ONE! IVE REPOSITIONED THE GROUND THREE TIMES AND I ADJUSTED BALLASTS A FEW TIMES AS WELL. I EVEN WENT SO FAR TO PURCHASE ANOTHER KIT TO SEE IF IT WAS THE BALLASTS AND LIGHTS THAT WERE THE PROBLEM! NO JOY! ITS DOING THE SAME THING SO NOW I HAVE 2 H13 BI XENON HID KITS AND I AM STILL HAVING THE PROBLEM! IF ANYBODY HAS FOUND THIS SITUATION OR YOUR A PROFESSIONAL AND KNOW ABOUT THIS PROBLEM, PLEEEAASSSSSSEEE I NEED YOUR HELP!!! HERE ARE SOME PICTURES TO SHOW THE LOCATION. [IMG][IMG][/IMG][/IMG][IMG][/IMG][IMG][/IMG]