Passenger Window
Thread Starter
|
Senior Member
Joined: Dec 2009
Posts: 2,121
Likes: 1
Passenger Window
Well, I did the LED mod to my passenger window, I believe it worked once I placed the window control box back on, and when I was modding my driver side (window master control box) I accidentally snapped the passenger window button off and ripped the center piece out. Now, my passenger window will not roll down, the passenger window control box lights up still, so it has to still get power, right? Could it be because I broke my window master control box passenger window switch, that it wont roll down?
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
That would be it.
The passengers window switches run through the driver's switch.
At rest position on the master window switch ( driver's ) this is ground on both circuits. The window lock is what provides power to the other window switches. Without the ground from the driver's side, window no work.
On the 1997-2003 MY trucks ( and 2004 Lightning and Heritage lines ) the illumination is still via the illumination circuit, unlike the 2004-2008 MYs.
Not sure what you mean by "window control box" Do you mean Power window switch ?
The passengers window switches run through the driver's switch.
At rest position on the master window switch ( driver's ) this is ground on both circuits. The window lock is what provides power to the other window switches. Without the ground from the driver's side, window no work.
On the 1997-2003 MY trucks ( and 2004 Lightning and Heritage lines ) the illumination is still via the illumination circuit, unlike the 2004-2008 MYs.
Not sure what you mean by "window control box" Do you mean Power window switch ?
Last edited by SSCULLY; Dec 19, 2009 at 12:43 AM. Reason: added the question
Thread Starter
|
Senior Member
Joined: Dec 2009
Posts: 2,121
Likes: 1
Found one place, but, it has a Scam Alert. Customer returned product, owner claims he never received it and was rude to the customer. But, here it is:
http://www.switchdoctor.net/products...tch-373-6.html
$77.50 to replace this!
http://www.switchdoctor.net/products...tch-373-6.html
$77.50 to replace this!
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
Online Ford dealer is $61.38 ( Tasca in this case, a site sponsor ).
Mechanical Catalog -> 2003 Ford F150 pickup
Electrical -> Body electrical -> Door -> Interior Trim
Window switch, f150, front, left, w/o super crew - f150 1997-03, heritage 2004 - F150 1997-03, HERITAGE 2004
Years :02-04
MSRP : $93.00
Price : $61.38
Trademotion is the same system for any of the Ford online parts dealers, so the path to find it is the same.
Took a quick look at a few, direct from a Ford dealer online, none of them were priced over 70.00 for the switch ( plus S/H ). I only used the Ford dealers that sell parts online, didn't look to the aftermarket parts sites.
Mechanical Catalog -> 2003 Ford F150 pickup
Electrical -> Body electrical -> Door -> Interior Trim
Window switch, f150, front, left, w/o super crew - f150 1997-03, heritage 2004 - F150 1997-03, HERITAGE 2004
Years :02-04
MSRP : $93.00
Price : $61.38
Trademotion is the same system for any of the Ford online parts dealers, so the path to find it is the same.
Took a quick look at a few, direct from a Ford dealer online, none of them were priced over 70.00 for the switch ( plus S/H ). I only used the Ford dealers that sell parts online, didn't look to the aftermarket parts sites.
