Hi, I came across 2000 Harley Davidson seats for my truck, all the seats fit great except there are different plugs under my seat now than there are on the H-D driver seat. Would anyone know where i can find some power seat schematics so I can get it working? Thanks

 

Did you remove a power seat ?

 

My orig. seat had two plugs a gray and a yellow, the HD seat has the gray but instead of yellow has a different black one that doesnt fit, I know a guy that can wire it up, but he needs the schematics for the power seat ***.... I cant find it anywhere...

 

Just get the correct plug for it and wire it in... Should just be power + ground going into the plug

 

Do you think that would be it, i know the yellow one goes the the seat belt, I think it pulls it tight if u get in an accident. I know when i disconected the passenger side from the yellow clip the guys at Ford said the airbag wont go off, so I was thinking the same thing for my side too? What do ya think? I was hoping cuttin and connecting to the black one would work, i just didnt want to mess it up.

 

Well when I installed power seats in my non-power seat optioned truck all I did was use the original plug for the seat. Took it out of the other truck. It was a simple hook up of power + ground... the other plug still went in the same.

 

okay, well hey thanks for the help, Im goin to the bone yard tomorow and gettin the plug from the HD truck. I'll geive it a shot! Thanks again!

 

Don't understand why they are different, the diagram for the 2003 shows a connector for the Supercab and one for all others ( SCrew and Std ).

You have a SuperCab and the 2000 HD was a SuperCab if memory serves me correctly ( 2001 was the HD Screw w/ the Super Charger ).

Take a look at the test chart below, see if the connector shape in the lower right hand corner looks like the different connectors you have ( C352 vs. C3016 )

 

2000 HD was a SuperCab... The '01 was a supercrew, but did not get supercharged until 2002 I believe.

 

Thanks, cab type was the big part of the question.
Don't know why std and SCrew had 1 connector, and SCab had another.

 

Hey thanks everyone for the help, the seat is in and works great, thanks again!

 

Do tell, no holding back now