Factory Power Windows out of XLT into STX
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,560
Likes: 2
From: Erie, PA
Factory Power Windows out of XLT into STX
This week I purchased all the interior door panels, regulators, and all the wiring I need to have the power windows, locks, mirrors, etc in my stx for $500 including mirrors with LED's. Is there any special modules that I have to take out of the truck so that the windows can work in mine? I am taking them out of the truck saturday. I was planning on trying to get all of the wiring back to the fuse box just to be safe
Junior Member
Joined: Aug 2008
Posts: 5
Likes: 0
Let me know how it goes. I am thinking about putting the OEM regulators in mine. Person before me put in a universal kit, it works just a little slow. Thats why I would like to go to OEM regulators.
Where did you get all the parts?
Where did you get all the parts?
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,560
Likes: 2
From: Erie, PA
Stealth...do you have a grey interior?? Let me know Id be more than willing to get rid of my manual parts
I got all the parts at a local salvage yard, Im actually thinking of getting everything from them used except for the front regulators just because of the problems I have heard of People having with them. I think if I had new ones I would be a little better off, but the rear ones shouldnt have been used as much and I think will be fine. The place I got them has about 7 f150's and there are alot of parts there.
I got all the parts at a local salvage yard, Im actually thinking of getting everything from them used except for the front regulators just because of the problems I have heard of People having with them. I think if I had new ones I would be a little better off, but the rear ones shouldnt have been used as much and I think will be fine. The place I got them has about 7 f150's and there are alot of parts there.