a/c wiring color that nobody cares to comment on

Thread Tools
 
Search this Thread
 
Old Nov 11, 2007 | 05:43 PM
  #1  
150_Eagle48's Avatar
Thread Starter
|
Senior Member
Joined: Feb 2007
Posts: 133
Likes: 0
From: Pikeville NC
a/c wiring color that nobody cares to comment on

the only thing I wanted to know is what color the wire running to my a/c is thats it and where to find it near the top of motorso I can hook up my e fans too thanks if anybody would like to say thanks in advance
 
Reply
Old Nov 11, 2007 | 08:42 PM
  #2  
Bluegrass's Avatar
Senior Member
Joined: Jul 2004
Posts: 6,200
Likes: 39
From: Easton, Pa.
Here is my comment!.
Unless your fingers, arms and eyesight are out of order, look at the plug on the A/C cluch for lead colors and trace them to where ever they go, for your application.
 
Reply
Old Nov 12, 2007 | 12:33 AM
  #3  
150_Eagle48's Avatar
Thread Starter
|
Senior Member
Joined: Feb 2007
Posts: 133
Likes: 0
From: Pikeville NC
about the ac

well actually I am disabled got taken down in the fist gulf war so I do not bend good anymore can see and feel just can not to where I need to feel too tryingnto teach my son some things buts its hard when you can not get high enoughto see these things thats why I asked so I guess I just sit here and people make smart *** comments to me but I am use to it
 
Reply
Old Nov 12, 2007 | 12:45 AM
  #4  
Patman's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Aug 2005
Posts: 21,337
Likes: 159
From: DFW
grey with a white stripe goes into the AC clutch solenoid, black comes out on a manual AC and on auto AC
 
Reply
Old Nov 12, 2007 | 08:42 AM
  #5  
projectSHO89's Avatar
Senior Member
20 Year Member
Joined: Oct 2002
Posts: 7,295
Likes: 125
From: St. Louis (Out in the woods)
Copping an attitude like that because you didn't get a prompt response to a previously posted question is a good way to get ignored or or to be flamed. If you're used to people making smart-*** comments to you, perhaps its time to review what in your behavior is bringing those comments out.

A simple repeated request in your original thread will bring it back to the top and back to visibility. All of the people who have access to the tech data you requested also have other lives and don't always have access to the needed documents, especially on weekends.

On this Veterans Day weekend, thank you for your service.

Steve
US Army 1976-1983
 

Last edited by projectSHO89; Nov 12, 2007 at 08:45 AM.
Reply
Old Nov 12, 2007 | 01:54 PM
  #6  
Bluegrass's Avatar
Senior Member
Joined: Jul 2004
Posts: 6,200
Likes: 39
From: Easton, Pa.
I will say thank you for your service to our country.
Please explain these things better or give a hint to give others a better idea of what the situation is.
If I had known of your position, I would have given a different reply.
Replies are driven by how the poster presents themselves and how the words are interpeted.
People interpet in a very large number of ways.
Some are the attitude of the moment, some due to their age, some due to ignorence, some due to there background, so this leaves things wide open on a board for interpetation and reply.
When something key is 'not said', it leaves a big possibility for missunderstanding, then the defenses of position begin needlessly.
If I get out and look on my truck for the color codes, they may be different on your truck. Net gain is zero help. That's why I gave the reply I did.
Have some one take a look for you and proceed with your project.
The very best to you and your family.
 
Reply
Old Nov 12, 2007 | 06:15 PM
  #7  
Patman's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Aug 2005
Posts: 21,337
Likes: 159
From: DFW
Originally Posted by projectSHO89
All of the people who have access to the tech data you requested also have other lives and don't always have access to the needed documents, especially on weekends.
I had already previously emailed him the entire AC system schematic.... But i figured i would be nice (since it was veterans day) and tell him the exact wires he was requesting
 
Reply




All times are GMT -4. The time now is 04:06 AM.