2005 power port connector
Thread Starter
|
Junior Member
Joined: Jul 2007
Posts: 2
Likes: 0
2005 power port connector
Hi,
I am trying to disconnect the connector from the power port that is on the dash. I dropped the glove box and felt around for a tab put did not have luck pulling the connector off. Does anyone know what the trick is? Thanks for the help.
John
I am trying to disconnect the connector from the power port that is on the dash. I dropped the glove box and felt around for a tab put did not have luck pulling the connector off. Does anyone know what the trick is? Thanks for the help.
John
Senior Member
Joined: Nov 2006
Posts: 5,495
Likes: 7
From: Memphis, TN 38135, USA, Earth
The connector should have 3 positions in a "T" arrangement with the release tab on the top center of the T. Go to this page, open the Illustration Guide PDF, scroll down to the 3-lead connectors, then find #682 (not quite halfway down the document). I found it by using the Buyer's Guide to find out which connector the F-Series, Power Point, 2005 uses.
Thread Starter
|
Junior Member
Joined: Jul 2007
Posts: 2
Likes: 0
Yes that is the connector. Thanks for the link. I actually pulled it off last night. I took a camera, put it in the glove box hole and took a couple of shots and got one that pictured that tab. I took a flat screw driver and got the connector off. Thanks for the help again,
John
John