As the title states, I removed the ac compressor, plugged both hoses.

Now the truck wont start

It jumped earlier in the day prior to removing the compressor, we were careful not to unplug anything but the compressor, and plugged the pipes that were going in and out of the compressor.

Is there an electrical circuit we interrupted by doing this? The starter seems to not be getting juice, so we replaced the solonoid,, NO JOY..

would the starter just crap out instantly?
Just seems as if we have an elctrical problem of some sort.

It did blow the remaining oil mist out all over the drivers side firewall when the pressure blew off, could this have some something?
Any help or tips on things to try would be great,

Thanks,
Ken

94 F-150
302
2 wheel drive

 

Anybody?

Think it could be the starter or something else?

Thanks for the help,

Ken

 

Anyone done the ac delete before?

ANyone have a problem simular to this?

 

well you said you had to jump the truck before you did the install. if you had to do that then something in your charging system is bad. battery probably has a bad cell. id recommend a replacement.

 

Thanks for a reply. We tried a new battery, and jumping it again. No joy.

Might be battery cable I am thinking.


Ken

 

Basically I am trying to find out if there is anything electrically with the ac compressor that would be giving us these indications.

Thanks,

Ken

 

Truck still wont start, new battery, new solinoid, how tough to change the batery cables throughout?

Thanks

Ken