What's up all, newbie here. Had a problem with my driver's side power window sticking a few weeks ago, didn't see any suggestions on here to fix, so I'm posting what I did, hopefully it will help someone some day. The problem was that the window would get stuck about halfway up, slowing and even stopping sometimes. Here's what I did to fix it: With my Haynes manual, I removed the door panel. Thinking one of my rails had gotten bent(or something was in them), I checked those out first. I did notice that when the window was getting stuck, the rubber that runs around the perimeter of the window was moving a little. So, I pulled the rubber out of the door(comes right out with the window down), moved it around a bit, reseated it, and voila, no more sticking window! Hope this helps.