I am having a problem with my drivers power window on a 98SC.How hard is it to replace the motor? Mine is getting slower on cold days. If its below 20 degrees I have to push it down. When it warms up a little better but still slow. Thanks

 

Did anyone ever findout how hard it is to change the motor?


Lewis

 

Window regulator motors are eay to change with window up remove door trim pannel carefuly pull back weather shield find 3 drill dimples near widow motor and make shure there is no wiring in the way behind the dimples using a 3/4 inch hole saw drill out the 3 dimples using a deep socket remove the three bolts through the drilled holes unplug the wiring conecter and remove the motor. reverse procedure to reinstall.