Speedo smoothness problem
Okay I recently removed my needles to do some custom work to my cluster and my speedo doesn’t seem as smooth as it was before. Every once and a while it will stick.
Yes I did check the clearance between the needle and the faceplate and there is plenty of space. Anyone had this problem before? Thanks 2000 4.6 Lariat 150 |
Okay, I did the TEST mode and my gauge sweep is fine, but when I go to the EE mode it says FAIL. Now according to the chart for the test mode it says to replace the instrument cluster. True or nothing to worry about. Could this be what is affecting the analog gauge for the speed?
|
All times are GMT -4. The time now is 05:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands