Supercrew Door Panel on a Supercab?

Old Jul 31, 2003 | 09:30 PM
  #1  
Crapgame's Avatar
Thread Starter
|
Member
Joined: Jun 2003
Posts: 39
Likes: 0
From: Great Northwest
Question Supercrew Door Panel on a Supercab?

I am going to do what KingRanchSC02 did on his extra cab pop out rear windows but I see that the supercrew switch assy cover needed to be modified. I was curious if anyone knows if the supercrew drivers door panel will fit on an extra cab drivers door panel so I would not have to modify the switch assy? Yes I know its a bit $ but I have a junk yard here that carries "any ting you want" he!he!.. Let me know fellas. Thanks
 
Reply
Old Jul 31, 2003 | 09:53 PM
  #2  
Home skillet's Avatar
Senior Member
Joined: Mar 2002
Posts: 451
Likes: 0
From: SE Texas
The two doors are different sizes so the door panels won't swap out.
 
Reply
Old Jul 31, 2003 | 10:11 PM
  #3  
KingRanchSC02's Avatar
Senior Member
Joined: Jul 2002
Posts: 711
Likes: 0
From: Hollywood, Florida
I didnt have to modify the switch assy crapgame, i had to modify the supercrew bezel that it goes in ($8.50). they are not interchangable. all i know is that they are the same length. The entire door panels don't interchange either. The front doors on our trucks are a lot bigger than the front doors on the supercrews.


Joe
 
Reply
Old Jul 31, 2003 | 11:26 PM
  #4  
Crapgame's Avatar
Thread Starter
|
Member
Joined: Jun 2003
Posts: 39
Likes: 0
From: Great Northwest
Thumbs up OKY DOKY

OKY DOKY
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:28 AM.