F150online Forums

F150online Forums (https://www.f150online.com/forums/)
-   Electrical Systems (https://www.f150online.com/forums/electrical-systems-67/)
-   -   Truck won't start..need help! (https://www.f150online.com/forums/electrical-systems/101705-truck-wont-start-need-help.html)

Sluggo / NY Jan 2, 2003 09:56 AM

Truck won't start..need help!
 
My 2001 F-150 is at the dealers with a "won't start" problem. The security light keeps flashing and shuts down the ignition system. They want $600+ to replace the "instument cluster"? I'm no ace mechanic, but this doesn't sound right to me. Anyone know if the system can just be disarmed? I'm willing to pay to get it fixed, but does this sound like the right fix? Thanks for any help..Sluggo (Chris)

medic Jan 2, 2003 09:14 PM

I'm not 100% sure, but I'm with you. It doesn't make sense for that problem to be cause by an instrument cluster. It sounds more like a PATS or Security System malfunction. Good Luck!

kidtriton Jan 2, 2003 09:36 PM

guess where the PATS module is?

A: instrument cluster (HEC)


although most of the time the transciever in the column will fix a no start pats problem. But im not there, so i would assume they have diagnosed it to be a bad pats module.

buschman Jan 5, 2003 10:16 PM

Sluggo -
Is the truck available for you to do some further diagnosis or is it still at the dealership?

Sluggo / NY Jan 13, 2003 07:47 AM

Truck fixed..same problem!
 
Got my truck back from the dealer last week along with a bill for $900. This was to replace the instument cluster to correct a problem with the security system keeping the truck from starting. The truck's now sitting in a parking lot with the same problem. When I turn the ignition on, the "theft" light flashes rapidly, the engine cranks fine, but won't fire! Any ideas..besides gasoline and a match! Thanks, Sluggo (Chris)

kidtriton Jan 14, 2003 06:47 AM

pats transceiver. its about $70. btw, $900? a cluster is only $360 retail.

buschman Jan 14, 2003 08:34 AM

Sluggo -
Turn the key on and wait for the THEFT light to stop flashing rapidly (about a minute). Then it will blink out a two-digit code and repeat it ten times. Post the results.....

Sluggo / NY Jan 14, 2003 09:30 AM

Truck's still at the dealer's
 
I appreciate the replys..the dealer just told me that they can't get the truck to malfunction! When I get it back..if it acts up again..I'll post the code I get after the theft light stops flashing. As for the price of the part..I called another dealer for a price and they quoted me the same $618 (list price) as my dealer charged. I also checked on ford-outlet.com and can get the same (oem) part for $271! Pretty healthy mark-up, huh? There must be a way to disable this system! If it was a Rolls and I lived in Boston..OK, but it's a pickup in upstate NY! Hell..we leave the keys in them up here! Thanks, Sluggo (Chris)

kidtriton Jan 15, 2003 06:37 AM

Re: Truck's still at the dealer's
 

Originally posted by Sluggo / NY
There must be a way to disable this system!
Nope

franchy Feb 3, 2003 09:50 AM

have same problem
 
i have the same problem but something i noticed is that the battery light stays on after i take the key out and that the fan blower stays on.

Raoul Feb 3, 2003 10:09 AM

Re: Truck fixed..same problem!
 

Originally posted by Sluggo / NY
Got my truck back from the dealer last week along with a bill for $900. ...When I turn the ignition on, the "theft" light flashes rapidly,...
Well, at least something is working!
I suspect the 'theft' light started flashing rapidly as soon as you paid the bill!

danny owens Feb 3, 2003 10:16 AM

PATS
 
did they check for codes when you took it back? it should have something in memory of the pcm and pats (hec).

franchy Feb 3, 2003 10:23 AM

do you think my problem is related to the PATS or the key less entry since the keyless entry doesnot seem to work but i have started the truck a few times although it took me some time to do it.

danny owens Feb 3, 2003 10:33 AM

pats
 
pats is an independent system, really need to check for codes.

jamminsam Feb 3, 2003 12:26 PM

..
 
I'm assuming that you've checked the "gas shut off switch"?
With the switch off, the engine cranks but it will not start.


All times are GMT -4. The time now is 11:55 PM.


© 2026 MH Sub I, LLC dba Internet Brands