Need Info On Flipchip

Thread Tools
 
Search this Thread
 
Old Dec 3, 2001 | 01:23 AM
  #1  
4RDPWR's Avatar
Thread Starter
|
Member
Joined: May 2001
Posts: 89
Likes: 0
From: El Centro, Ca, USA
Need Info On Flipchip

Ok Mike. i have a few questions for ya. ok when i go to order a chip. Do i tell you everything i have. like lets say i have. 2000 f-150 4.6 5 speed manual trans. flowmaster exhuast. K&N FIPK. Poweraid throttle bodys spacer. 285 size tires. Do you program all the info into the chip so the chip knows i have all that studd on my truck. And lets say after i get the chip. I regear my truck. Do i need to send my chip back to have it reprogramed, and if so how much does that usually cost. If you could let me know everything about this here FlipChip. i plan on ordering one here in a few months after i get the rest of the stuff for my truck. and alos how much more power is it going to add and what else is the chip going to do to my truck. THANK YOU SO MUCH FOR ANY HELP
 
Reply
Old Dec 4, 2001 | 07:27 PM
  #2  
Superchips_Distributor's Avatar
Former Sponsor
Joined: Mar 1998
Posts: 13,385
Likes: 4
From: Virginia
Hi 4RDPWR,

Nice to see you again!

You'll need to contact us privately for all those details. Short things we'll answer here on the boards when we can & if it's appropriate, or in email, but for anything detailed, that is going to require a phone call. We cannot discuss pricing here on F-150 Online either, as there are very strict & clear policies against that. Thanks in advance for your understanding on that, we sincerely appreciate it!

Briefly.................

For a long list of modifications, yes, it's always best to call us and go over that information in detail, to determine whether or not custom programming is needed. In general, things like K&N air filters, throttle body spacers, airbox kits & cat-back exhaust changes do not require any custom programming in these F-150's.

The only thing our of your list of mods there might be the tire size, if you have changed that, and we can compensate for that in most 1999 & 2000 F-150's, so that is the only potential need for any custom programming among what you have listed there.

Yes, if you do a gear ratio change at a later date, then we'll need to re-do the program for you, so yes, there is a small fee for that, as it requires a good bit of new work to be done.

Get with us via email or phone for details, pricing, & thanks again for your understanding on that.

We hope you have a great Christmas!
 
Reply




All times are GMT -4. The time now is 10:08 AM.