Edge!!!! WOW!!!!
Thread Starter
|
Member
Joined: Feb 2012
Posts: 10
Likes: 0
From: Florida
Edge!!!! WOW!!!!
To start, Im new here. I have been a long time follower and have gained loads of knowledge reading these posts. Anyways, I have an 04 FX4 Scab. Leveled with three inch body 35" toyo M/T's on 18" machined and black XD Rockstars. Exhaust is, well.... custom.LOL. Removed the rear two cats, no mufflers and an x-pipe trued out. After four years of owning my truck, I finally broke down and bought the Edge. (Which I lucked up and got for $200 on ebay!!
!) Anyways, I was blown away by it. I messed around with the programming and ran 3 0-60 times under 7.5 seconds. This thing was a slug before, but would pull a house down. This is by no means flying, but I did a stock run at around 11 seconds first. I am pretty amazed at this product. I plan on sending it to PHP and seeing if that makes it even better. I decided not to go with the CAI until custom tuned because all I have read about the 04's running lean. I did do the "Gotts" or "DWV" Mod and cut the silencers off when I installed my edge. So far no issues. I added a couple pictures in my alblum, but they are not of the best quality. Oh, and just to throw it in there, I had to replace my motor last year, not fun, but the drive train has 105,000 miles, and the motor...... 12,000!!!! 
!) Anyways, I was blown away by it. I messed around with the programming and ran 3 0-60 times under 7.5 seconds. This thing was a slug before, but would pull a house down. This is by no means flying, but I did a stock run at around 11 seconds first. I am pretty amazed at this product. I plan on sending it to PHP and seeing if that makes it even better. I decided not to go with the CAI until custom tuned because all I have read about the 04's running lean. I did do the "Gotts" or "DWV" Mod and cut the silencers off when I installed my edge. So far no issues. I added a couple pictures in my alblum, but they are not of the best quality. Oh, and just to throw it in there, I had to replace my motor last year, not fun, but the drive train has 105,000 miles, and the motor...... 12,000!!!!
Last edited by Cwhat; Feb 7, 2012 at 11:05 PM.
Thread Starter
|
Member
Joined: Feb 2012
Posts: 10
Likes: 0
From: Florida
Just thought I would get some all around thoughts on anything you may want to comment on!!!! Oh, and if anyone can tell me how to get my dang truck picture on my post you would be much appreciated
Senior Member
Joined: Aug 2010
Posts: 224
Likes: 0
From: LITTLE ELM, TX
This is awesome.. I am hoping to buy one in the next few days
To start, Im new here. I have been a long time follower and have gained loads of knowledge reading these posts. Anyways, I have an 04 FX4 Scab. Leveled with three inch body 35" toyo M/T's on 18" machined and black XD Rockstars. Exhaust is, well.... custom.LOL. Removed the rear two cats, no mufflers and an x-pipe trued out. After four years of owning my truck, I finally broke down and bought the Edge. (Which I lucked up and got for $200 on ebay!!!) Anyways, I was blown away by it. I messed around with the programming and ran 3 0-60 times under 7.5 seconds. This thing was a slug before, but would pull a house down. This is by no means flying, but I did a stock run at around 11 seconds first. I am pretty amazed at this product. I plan on sending it to PHP and seeing if that makes it even better. I decided not to go with the CAI until custom tuned because all I have read about the 04's running lean. I did do the "Gotts" or "DWV" Mod and cut the silencers off when I installed my edge. So far no issues. I added a couple pictures in my alblum, but they are not of the best quality. Oh, and just to throw it in there, I had to replace my motor last year, not fun, but the drive train has 105,000 miles, and the motor...... 12,000!!!!
!) Anyways, I was blown away by it. I messed around with the programming and ran 3 0-60 times under 7.5 seconds. This thing was a slug before, but would pull a house down. This is by no means flying, but I did a stock run at around 11 seconds first. I am pretty amazed at this product. I plan on sending it to PHP and seeing if that makes it even better. I decided not to go with the CAI until custom tuned because all I have read about the 04's running lean. I did do the "Gotts" or "DWV" Mod and cut the silencers off when I installed my edge. So far no issues. I added a couple pictures in my alblum, but they are not of the best quality. Oh, and just to throw it in there, I had to replace my motor last year, not fun, but the drive train has 105,000 miles, and the motor...... 12,000!!!!
Senior Member
Joined: Aug 2010
Posts: 224
Likes: 0
From: LITTLE ELM, TX
I have been scouring the classifieds for about a month. Finally found a gryphon on here tonight. I am waiting for the gut to respond. HOPING I was first to PM him.
I am getting 35 BFG's on Friday so I will need it.
I am getting 35 BFG's on Friday so I will need it.
Enjoy it! Welcome to the site!
Hambone: I don't think the f250 gryphons work on 150's. But I could be wrong.
Hambone: I don't think the f250 gryphons work on 150's. But I could be wrong.
Trending Topics
Thanks man! and hide the wallet quick! I got re-hit with that feeling a few months back... Once it bites ya you will never stop... It's a curse
Member
Joined: Oct 2008
Posts: 30
Likes: 0
From: WARNER ROBINS, GA
Man, i wish i could feel that happy! I have an edge but scared to pull the trigger on my 08 MarkLT. Nobody will commit to saying it will work, the most i can get is "it should" work 
FYI i'm pretty sure PHP is no longer converting regular Edge programmers to their software. Pretty sure you have to buy a programmer from them. I could be mistaken, but i'm almost positive i've read that a couple times now.
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,079
Likes: 82
From: Burleson/Athens/Brownsboro, TX
If you plug in the Edge and it recognizes your HEX code, you are good to proceed. If it does not recognize the HEX, it will do nothing and you will have no damage.
__________________
Jim
Jim