best tuner for me?

Thread Tools
 
Search this Thread
 
Old Jul 5, 2008 | 12:18 AM
  #1  
liftedblakk's Avatar
Thread Starter
|
Member
Joined: Jun 2008
Posts: 74
Likes: 0
From: dallas texas
best tuner for me?

what would be the best tuner for me to get i have an 06 f250 screw lifted and whipple racing supercharged also with a gibson sideswept exhaust
 
Reply
Old Jul 5, 2008 | 02:45 AM
  #2  
Grubrunner's Avatar
Senior Member
Joined: Sep 2005
Posts: 2,723
Likes: 0
From: Rich, Virginia
Originally Posted by liftedblakk
what would be the best tuner for me to get i have an 06 f250 screw lifted and whipple racing supercharged also with a gibson sideswept exhaust
That's not what your vehicle description says?
 
Reply
Old Jul 5, 2008 | 02:48 AM
  #3  
Racing2Fast's Avatar
Senior Member
Joined: Aug 2006
Posts: 479
Likes: 0
From: Memphis
Post a pic of that rig, esp. the motor !!

Check around for a local speed shop, if your s/c that's your best bet.

Otherwise I have to rec. www.vmptuning.com


 
Reply
Old Jul 5, 2008 | 12:11 PM
  #4  
liftedblakk's Avatar
Thread Starter
|
Member
Joined: Jun 2008
Posts: 74
Likes: 0
From: dallas texas
sorry guys i meant f150
 
Reply
Old Jul 5, 2008 | 12:36 PM
  #5  
ThumperMX113's Avatar
Suspended
Joined: Nov 2004
Posts: 17,079
Likes: 0
Since you're running a supercharged set-up, the best option would be to get it dyno tuned with a Xcal2 or Xcal3. Where are you located? Hopefully close to someone that does good work ...
 
Reply
Old Jul 5, 2008 | 01:38 PM
  #6  
liftedblakk's Avatar
Thread Starter
|
Member
Joined: Jun 2008
Posts: 74
Likes: 0
From: dallas texas
dallas texas
 
Reply
Old Jul 5, 2008 | 04:29 PM
  #7  
dirtyd88's Avatar
Senior Member
Joined: Mar 2008
Posts: 4,190
Likes: 2
From: Burleson, TX
i posted a thread this past spring about where i can find a dyno around arlington, but unfortunately the thread got deleted from the South forum. there is a place in south arlington that does mustangs, but i dont think their dyno will accomodate your monster. there was another place in fort worth i wan to say, but i can remember the name of it.

my advice is to just throw a thread in the south forum and see where people tell you to go. that or PM some of the guys that live in the DFW area.
 
Reply

Trending Topics

Old Jul 5, 2008 | 10:21 PM
  #8  
ThumperMX113's Avatar
Suspended
Joined: Nov 2004
Posts: 17,079
Likes: 0
If the dyno's rollers are as wide as Justin's at VMP Tuning's, there shouldn't be a problem. My 37x13.50s fit fine on them.
 
Reply
Old Jul 6, 2008 | 10:26 PM
  #9  
Adgar's Avatar
Junior Member
Joined: Jun 2008
Posts: 25
Likes: 0
From: San Antonio TX
Originally Posted by liftedblakk
dallas texas
Go to HPP Racing in Dallas, they have tuning experience with modular ford engines. They should get you straight.
 
Reply




All times are GMT -4. The time now is 07:44 PM.