chip
Senior Member
Joined: Feb 2004
Posts: 10,390
Likes: 10
Hi.
What year?
If it's pre-04, look at the pcm ( pass side footwell - silver box). If there is a module stuck in the J3 port - yer chipped.
Now, if a flash programmer was used, on any year ( and one wasn't included with the truck) - you really can't tell, unless the seller tells you.
What year?
If it's pre-04, look at the pcm ( pass side footwell - silver box). If there is a module stuck in the J3 port - yer chipped.
Now, if a flash programmer was used, on any year ( and one wasn't included with the truck) - you really can't tell, unless the seller tells you.
Senior Member
Joined: Feb 2004
Posts: 10,390
Likes: 10
Originally Posted by ThumperMX113
I really doubt it unless they gave you a hand held tuner since it can only be used on one vehicle. It wouldn't make much sense for them to tune the truck and than take the tuner with them. 
This happens- perhaps not too frequently - but it does ...
Originally Posted by bryanfeelsgood
Ok, this is my problem. I just got a new truck, and I pulled my EDGE out of the old one without resetting it to the stock tune. So now when I plug the EDGE into my new truck it still says it's on the Level 2 tune.
I would think that the stock program is different on my old '04 and my new '07 are different, so I want to make sure that I am not going to screw anything up.
Is there anyway to reset the EDGE back to original settings?
I would think that the stock program is different on my old '04 and my new '07 are different, so I want to make sure that I am not going to screw anything up.
Is there anyway to reset the EDGE back to original settings?
Senior Member
Joined: Jun 2007
Posts: 1,645
Likes: 0
Originally Posted by MGDfan
Hi.
What year?
If it's pre-04, look at the pcm ( pass side footwell - silver box). If there is a module stuck in the J3 port - yer chipped.
Now, if a flash programmer was used, on any year ( and one wasn't included with the truck) - you really can't tell, unless the seller tells you.
What year?
If it's pre-04, look at the pcm ( pass side footwell - silver box). If there is a module stuck in the J3 port - yer chipped.
Now, if a flash programmer was used, on any year ( and one wasn't included with the truck) - you really can't tell, unless the seller tells you.
Sorry, back to chips.
Senior Member
Joined: Feb 2004
Posts: 10,390
Likes: 10
Originally Posted by last5oh_302
LMAO! I just realized you changed your progression bar detector thingy.
Sorry, back to chips.
Sorry, back to chips.
Continuous improvement, my boy, continuous improvement.
Somewhat along the lines of ... uses for anti-sieze.
Trending Topics
Senior Member
Joined: Jun 2007
Posts: 1,645
Likes: 0
Originally Posted by MGDfan
Slow today, are we?
Continuous improvement, my boy, continuous improvement.
Somewhat along the lines of ... uses for anti-sieze.
Continuous improvement, my boy, continuous improvement.
Somewhat along the lines of ... uses for anti-sieze.
BTW, I still don't believe you did your hubs
Senior Member
Joined: Feb 2004
Posts: 10,390
Likes: 10
Originally Posted by last5oh_302
I may not have found it quite as funny as I did, but I finally read the last few pages of that boredom thread...LOL!
BTW, I still don't believe you did your hubs
BTW, I still don't believe you did your hubs
You know you've won when the other party pulls out the **** / racism stick in desperation. Tool, lol!
Not even a real contest with a scumbag like that.
I hope the NM cops have some fun with it.
Oh, BTW - You can borrow my anti-sieze anytime. I'll even apply it for you, as apparently you have not a clue
NOW - BACK to CHIPS !!!
Last edited by MGDfan; Sep 5, 2007 at 09:27 PM.
Senior Member
Joined: Jun 2007
Posts: 1,645
Likes: 0
lol... I didn't read all of the thread. I kinda picked up on the topic at hand through your comments, but I couldn't find the actual posts, in what, over 700 pages of thread?
Yeah, the **** comment was a doozy.
That was near the end of the thread, and that's why I saw it.
Pffft, anti-seize, anti-shmeeze!!
Okay, back to this boring chip crap
Yeah, the **** comment was a doozy.
That was near the end of the thread, and that's why I saw it.Pffft, anti-seize, anti-shmeeze!!
Okay, back to this boring chip crap
Senior Member
Joined: Feb 2004
Posts: 10,390
Likes: 10
Originally Posted by last5oh_302
over 700 pages of thread?
Go to yer User CP - you can change the # of displayed threads/page to a more reasonable value... bump it up to 40 ...helps a bit...Back to Chips! Honest!
Senior Member
Joined: Jun 2007
Posts: 1,645
Likes: 0
Originally Posted by MGDfan
Go to yer User CP - you can change the # of displayed threads/page to a more reasonable value... bump it up to 40 ...helps a bit...
Back to Chips! Honest!
Back to Chips! Honest!
Perhaps you might narrow it down for me with a direct link 
This thread is dead anyway. These trucks don't actually use chips anyway, right? I thought they were standalone tuners.
Okay, back to chips, I guess
