EDGE on 07's
Originally Posted by MosineeFX4
I think that the guys at Edge are really dropping the ball on this subject. My guess is that it is the all too common situation where management is pushing volume, volume, volume.............without adding needed support. My guess is that they are too busy trying to get new tuners out that will work for the other brand gasoline trucks (chevy, dodge, toyota, etc.) and that there is not enough resources left to manage their current product lines. It seems that there was great support when it was early in it's release.........but now........new updates have been few and far between. Hopefully they will get their act together and fix what problems there are.
__________________
Jim
Jim
i have a 2007 extended cab fx4 with the edge installed. i did the update and programed it to level 2 and it worked fine until i turn my truck off then restart it. it throws a code every time P0605. after i put it back to stock its fine. i have yet to contact edge yet but i will be doing that today. also it drives fine even after it throws the code...i just clear it so i dont have to look at the check engine light on a truck with only 1000 miles on it lol
Originally Posted by tufftaco2k4
i have a 2007 extended cab fx4 with the edge installed. i did the update and programed it to level 2 and it worked fine until i turn my truck off then restart it. it throws a code every time P0605. after i put it back to stock its fine. i have yet to contact edge yet but i will be doing that today. also it drives fine even after it throws the code...i just clear it so i dont have to look at the check engine light on a truck with only 1000 miles on it lol
__________________
Jim
Jim
Originally Posted by RYAN24
P0605 Internal Control Module Read Only Memory (ROM) Error 
Hmmm... I thought I remembered that problem with superships, and I was right. I searched around a bit and found that the 0605 code used to be set every time a superchip was installed in a truck. The pcm considered a change to be a malfunction I guess... Did you buy your edge from Mike Troyer? He might have some insight on this.....
Last edited by chester8420; Feb 14, 2007 at 07:27 PM.
I had the same code pop up on my 07' yesterday. I thought it was because of the weather, but since someone else with an edge on an 07 is getting the exact same code, maybe they need to fix the update.
Hi.
Well, this certainly doesn't appear to be 'user error' - more like 'product error'
.
Keep in mind the 07's are new, with yet another PCM just to complicate matters more:
So it's likely just an update that hasn't been fully tested in a rush to get it out. Did it say 'Beta'?
Y'know - 'Beta' & 'Unstable' PCM code releases should be verboten. Your truck is not a pc, where you can just go and uninstall/rollback the software if it eff's up, or worst case reformat the HD. Back up in a couple hours ( if you have backups, that is - shame on you if you don't - no excuse). Some folks need their trucks to work reliably. $40K versus $400 - you choose. Jusy my opinion, of course, but what do I know?
Don't be the guinea pig here, roll it back until a bugfree release is available.
What I would do. No wait... actually what I DID do was go with a tuner where comprehensive testing is done in-house prior to releasing code. Not using customers' trucks as crash-test dummies as a substitute for proper testing.
That's just me, though - you go do what you gotta do....
Man, Love them gauges, though, eh? When they're not frozen.
J/K, folks !!! - it's all good
Cheers
Bubba
Well, this certainly doesn't appear to be 'user error' - more like 'product error'
.Keep in mind the 07's are new, with yet another PCM just to complicate matters more:
Originally Posted by Superchips_Distributor
... we have just found that some of the 2007 F-150's 5.4 3V's have yet another different 2048K PCM in them, changed from the 1537K PCM that was already a change for 2007 in the other 2007 5.4 3V & 4.6 V8 F-150's, and that 2 MB PCM is being worked on right now - so there is a ways to go before it is going to be ready for these vehicles....
Y'know - 'Beta' & 'Unstable' PCM code releases should be verboten. Your truck is not a pc, where you can just go and uninstall/rollback the software if it eff's up, or worst case reformat the HD. Back up in a couple hours ( if you have backups, that is - shame on you if you don't - no excuse). Some folks need their trucks to work reliably. $40K versus $400 - you choose. Jusy my opinion, of course, but what do I know?
Don't be the guinea pig here, roll it back until a bugfree release is available.
What I would do. No wait... actually what I DID do was go with a tuner where comprehensive testing is done in-house prior to releasing code. Not using customers' trucks as crash-test dummies as a substitute for proper testing.
That's just me, though - you go do what you gotta do....
Man, Love them gauges, though, eh? When they're not frozen.
J/K, folks !!! - it's all good
Cheers
Bubba
I'm done tinkering with the EDGE and waiting for a proper update. I placed it in the classifieds when I ordered a Troyer tuned X-CAL 2 last week. A deal was finalized today and the EDGE is now on its way to someone in Irvine CA as we speak. If it didn't sell, I was going to keep it just for the gauges, but it did. At least the guy who bought it has a LARIAT so the custom painted pod will match his truck.
Originally Posted by expy03
No your not. You never are when you get on here and take shots at another product other than a "Troy tune".
Am so !!! LOL.
When the product actually takes shots at itself, as witnessed here, I just have to sit back & laugh...
No one's perfect - but I'd prefer to know someone who actually gives a chit is backing my tuning. Who actually is responsive if a problem does arise. Not a nameless/faceless entity that may or may not be inclined to help you.
You like taking risks - good for you
In closing - the only folks who take me seriously are the ones who hopelessly lack a sense of humour ;-))
Cheers
(Nature's beer fridge - my back deck! Except now after 50cm of snow, I can no longer find my back deck, nor my beer
)Bubba
Last edited by MGDfan; Feb 16, 2007 at 08:28 AM.




