Xcal datalogging ?

Thread Tools
 
Search this Thread
 
Old Nov 28, 2006 | 11:32 PM
  #1  
Mobansheerider's Avatar
Thread Starter
|
Member
Joined: Oct 2006
Posts: 46
Likes: 0
From: St. Louis area
Xcal datalogging ?

For those of you with the Xcal 2 what parameters are you logging? I'm not talking to send in paperwork for TP, I'm talking for personal preference just to see what's going on.
Thanks
 
Reply
Old Nov 29, 2006 | 07:14 AM
  #2  
MGDfan's Avatar
Senior Member
Joined: Feb 2004
Posts: 10,390
Likes: 10
Hi.

While myself or anyone could read off the parameters from the docs, it would be a breach of the copyright, so I will not.

As I've stated previously, simply load up Livelink v3.1.31 or v3.1.33, go into Help>Contents and you'll see that the third item from the bottom is: "Useful Parameters to Log". This is as good a starting point as any, although the list is far from complete. This is 'freeware', so there's no copyright to breach

I see you've had no hits over on SCT's forum.

And I have to ask - what did JLT have to say about this? Since you bought from him, he should be your best & most timely source of this info.

I for one do not believe the assertion that JLT's tunes never require logging - that's just BS. Way too much evidence to the contrary given the initial state of these trucks' tuning. Add mods to the mix and, well, .... boom.

Hope this helps.

Cheers
Bubba

PS - Jeez, I hope Mike's datalogging review queue is shorter than his tune build queue
 

Last edited by MGDfan; Dec 4, 2006 at 02:52 PM.
Reply
Old Nov 30, 2006 | 07:12 PM
  #3  
Mobansheerider's Avatar
Thread Starter
|
Member
Joined: Oct 2006
Posts: 46
Likes: 0
From: St. Louis area
I need to call him, just haven't had the chance (work 9am-7:30pm). I noticed the JLT tunes seem rich, and I know he has stated in forums he'd rather them be rich than lean to be safe. I am going to get it on the dyno and see what's going on anyways.
 
Reply




All times are GMT -4. The time now is 03:12 AM.