Troyer's Dyno Day Roll Call!

Thread Tools
 
Search this Thread
 
Old Apr 2, 2006 | 11:42 AM
  #1  
FX4ME2's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2005
Posts: 1,156
Likes: 0
From: S.E. Michigan
Troyer's Dyno Day Roll Call!

Who's all going? Bigblackfx4 and I are going to be there from the Michigan/Ohio area. I spent yesterday going over the truck and Re-tightening my Magnaflow exhaust clamps. I changed the oil and checked the air pressure in the tires, and gave her a bath.
 
Reply
Old Apr 2, 2006 | 06:25 PM
  #2  
FX4 Matt's Avatar
Registered User
Joined: Feb 2005
Posts: 2,679
Likes: 0
From: Cape Cod, Ma
I'll be there around noon on sat
 
Reply
Old Apr 2, 2006 | 08:38 PM
  #3  
F150Truck'in's Avatar
Senior Member
Joined: Jul 2005
Posts: 1,557
Likes: 1
From: Chesterfield,Va.
I'm planing getting there around 11:00 am Sat, Dyno time is 1:00 pm Sat, room reserved for Sat night...
 
Reply
Old Apr 3, 2006 | 08:02 AM
  #4  
Marc Carpenter's Avatar
Senior Member
Joined: Jul 2001
Posts: 2,803
Likes: 1
From: North Canton, Ohio
Enjoy the trip down, and over....See you there....
 
Reply
Old Apr 3, 2006 | 05:14 PM
  #5  
openclasspro#11's Avatar
Senior Member
Joined: Aug 2004
Posts: 2,824
Likes: 0
From: North Huntingdon,Pa.
ok

vangina-
fuel filter -2k miles-check
oil-amsoil-2500k miles check
fuel-sunoco ultra 94 check

phil-
wife clearance-check
appetite for italian food-hint,hint mike-check
see you all this weekend-phil
 
Reply
Old Apr 3, 2006 | 05:43 PM
  #6  
Marc Carpenter's Avatar
Senior Member
Joined: Jul 2001
Posts: 2,803
Likes: 1
From: North Canton, Ohio
Originally Posted by openclasspro#11
vangina-
fuel filter -2k miles-check
oil-amsoil-2500k miles check
fuel-sunoco ultra 94 check

phil-
wife clearance-check
appetite for italian food-hint,hint mike-check
see you all this weekend-phil
Well Phil, there is exactly "1" Italian restaurant in Covington. It is a small family owned place that on a scale of 1 to 10, I would give it a 6.
But there is plenty of cold beer for those that partake, and the friendship will be free flowing all weekend. Have a safe trip....
 
Reply
Old Apr 3, 2006 | 06:36 PM
  #7  
beowulf's Avatar
Senior Member
Joined: Oct 2005
Posts: 300
Likes: 0
From: Lincoln, NE
Originally Posted by Marc Carpenter
.... a scale of 1 to 10, I would give it a 6.
But there is plenty of cold beer for those that partake, and the friendship will be free flowing all weekend. Have a safe trip....
Plenty of cold beer, eh? Gotta have the priorities straight! A few brews could turn that six upside down to a nine.

Sounds like fun, only wish I could make it.
 
Reply
Old Apr 9, 2006 | 01:16 PM
  #8  
Superchips_Distributor's Avatar
Former Sponsor
Joined: Mar 1998
Posts: 13,385
Likes: 4
From: Virginia
Thanks to all of you who came - and as everyone who was there Saturday saw, the most perfectly tuned F-150 I have *ever* seen was Tim Rigby's - not only did it not need any changes to the A/F's, but the fuel trims were ZERO everywhere with one exception - in one areas, for a couple of tenths of a volt on the MAF curve, the fuel trims were 3% - that is the most perfect tune I have ever seen - and I don't say that to brag, it's just the facts - everyone was pretty much floored.

We got exactly the A/F's we commanded, and his Stage 1 normally aspirated truck STILL hit 101 ve (volumetric efficiency) and made excellent power, of course - WOW, what a truck!

Thanks again to all of you for coming, it was a blast getting to see you guys - sorry I didn't get to spend a lot of time with a couple of you, and that you spent a good deal of time just standing around watching, but that's kinda how dyno day events tend to be - it's really just as much about getting to meet the faces behind the names here of F-150 Online as it is about tuning & power, etc. Hats off to all of you who came and made it such a success!
 
Reply




All times are GMT -4. The time now is 05:46 PM.